SEC Filing | Hurco Companies, Inc.

View:

Download DOC

Download PDF

Download XLS

Download XBRL

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

x	Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the fiscal year ended October 31, 2011 or

¨	Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the transition period from _________ to _________.

Commission File No. 0-9143

HURCO COMPANIES, INC.

(Exact name of registrant as specified in its charter)

Indiana	35-1150732
(State or other jurisdiction of	(I.R.S. Employer Identification Number)
incorporation or organization)
One Technology Way
Indianapolis, Indiana	46268
(Address of principal executive offices)	(Zip code)

Registrant’s telephone number, including area code

(317) 293-5309

Securities registered pursuant to Section 12(b) of the Act:	None
Securities registered pursuant to Section 12(g) of the Act:	Common Stock, No Par Value
	(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d). Yes ¨ No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to the filing requirements for at least the past 90 days. Yes x No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer or a non-accelerated filer. See definition of “accelerated filer” and “large accelerated filer” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ¨ Accelerated filer x Non-accelerated filer ¨ Smaller Reporting Company ¨

(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes x No ¨

The aggregate market value of the registrant’s voting stock held by non-affiliates as of April 30, 2011 (the last day of our most recently completed second quarter) was $209,328,000.

The number of shares of the registrant’s common stock outstanding as of January 3, 2012 was 6,441,351.

DOCUMENTS INCORPORATED BY REFERENCE: Portions of the registrant’s Proxy Statement for its 2012 Annual Meeting of Shareholders (Part III).

Disclosure Concerning Forward-looking Statements

Certain statements made in this annual report on Form 10-K may constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. These risks, uncertainties and other factors include the risks identified in Item 1A.

PART I

Item 1. BUSINESS

General

Hurco Companies, Inc. is an industrial technology company. We design, manufacture and sell computerized machine tools, consisting primarily of vertical machining centers (mills) and turning centers (lathes), to companies in the metal working industry through a worldwide sales, service and distribution network. Although our computer control systems and software products are proprietary, they predominantly use industry standard personal computer components. Our computer control systems and software products are primarily sold as integral components of our computerized machine tool products. As used in this report, the words “we”, “us”, “our”, “Hurco” and the “Company” refer to Hurco Companies, Inc. and its consolidated subsidiaries.

Since our founding in 1968, we have been a leader in the introduction of interactive computer control systems that automate manufacturing processes and improve productivity in the metal parts manufacturing industry. We pioneered the application of microprocessor technology and conversational programming software for use in machine tools. Our computer control systems can be operated by both skilled and unskilled machine tool operators and yet are capable of instructing a machine to perform complex tasks. The combination of microprocessor technology and patented interactive, conversational programming software in our computer control systems enables operators on the production floor to quickly and easily create a program for machining a particular part from a blueprint or computer aided design file and immediately begin machining that part.

Our executive offices and principal design and engineering operations are headquartered in Indianapolis, Indiana, USA. Sales, application engineering and service subsidiaries are located in Canada, China, France, Germany, India, Italy, Poland, Singapore, South Africa, and the United Kingdom. We have manufacturing operations in Taiwan and China, and distribution facilities in the USA, the Netherlands, and Taiwan.

Our strategy is to design, manufacture and sell a comprehensive line of computerized machine tools that incorporate our proprietary, interactive, computer control technology for the global metalworking market. Our technology is designed to enhance the machine tool user's productivity through ease of operation and higher levels of machine performance (speed, accuracy and surface finish quality). We use an open system software architecture that permits our computer control systems and software to be produced and employed using standard PC hardware. We have emphasized a “user-friendly” design that employs both interactive conversational and graphical programming software. We routinely expand our product offering to meet customer needs, which has led us to design and manufacture more complex machining centers with advanced capabilities. We bring a disciplined approach to strategically enter new geographic markets, as appropriate. Combined with a strong worldwide demand for machine tools, our introduction of new, technologically advanced products and expansion into new markets resulted in significant growth prior to the recent recession and in fiscal 2011.

Industry

Machine tool products are considered capital goods, which makes them part of an industry that has historically been highly cyclical.

Although, industry association data for the U.S. machine tool market is available, that market only accounts for approximately 5% of worldwide consumption. Reports available for the U.S. machine tool market include:

United States Machine Tool Consumption – generated by the Association for Manufacturing Technology and American Machine Tool Distributor Association, this report includes metal cutting machines of all types and sizes, including segments in which we do not compete

Purchasing Manager’s Index - developed by the Institute for Supply Management and reports activity levels in U.S. manufacturing plants that purchase machine tools

Capacity Utilization of Manufacturing Companies – issued by the Federal Reserve Board

A limited amount of information for foreign markets is available, and different reporting methodologies are used by various countries. Machine tool consumption data published by Gardner Publications, Inc., calculates machine tool consumption annually by country. It is important to note that data for foreign countries is based on government reports that may lag 6 to 12 months and therefore is unreliable for forecasting purposes.

Demand for capital equipment can fluctuate significantly during periods of changing economic conditions as we experienced during the recent global recession that began in early fiscal 2009. We experienced a return to higher levels of demand in fiscal 2011. Manufacturers and suppliers of capital goods, such as our company, are often the first to experience these changes in demand. Additionally, since our typical order backlog is approximately 30 to 45 days, it is difficult to estimate demand with any reasonable certainty. Therefore, we do not have the benefit of relying on the common leading indicators that are available to many other industries for market analysis and forecasting purposes.

Products

Our core products consist of general purpose computerized machine tools for the metal cutting industry. These are, principally, vertical machining centers (mills) and turning centers (lathes), with which our proprietary software and computer control systems are fully integrated. We also produce computer control systems and related software for press brake applications that are sold as retrofit units for installation on existing or new press brake machines. Additionally, we produce and distribute software options, control upgrades, hardware accessories, and replacement parts for our machine tool product lines, and we provide operator training and support services to our customers.

The following table sets forth the contribution of each of our product groups and services to our total revenues during each of the past three fiscal years:

Net Sales and Service Fees by Product Category
(Dollars in thousands)	Year ended October 31,
	2011				2010				2009

Computerized Machine Tools	$	156,736	86.9	%	$	88,184	83.3	%	$	75,213	82.7	%
Computer Control Systems and Software *		3,322	1.8	%		2,347	2.2	%		2,546	2.8	%
Service Parts		14,836	8.2	%		10,798	10.2	%		8,851	9.7	%
Service Fees		5,506	3.1	%		4,564	4.3	%		4,406	4.8	%
Total	$	180,400	100	%	$	105,893	100	%	$	91,016	100	%

*	Amounts shown do not include computer control systems sold as integrated components of computerized machine tools.

Computerized Machine Tools – Machining and Turning Centers

We design, manufacture and sell computerized machine tools equipped with a fully integrated interactive computer control system that features our proprietary WinMax® software. Our computer control system enables a machine tool operator to create complex two-dimensional or three-dimensional machining programs directly from an engineering drawing or computer aided design geometry file. An operator with little or no machine tool programming experience can successfully create a program with minimal training and begin machining the part in a short period of time. The control features an operator console with a liquid crystal display (LCD), and incorporates an upgradeable personal computer (PC) platform using a high speed processor with solid rendering graphical programming. In addition, WinMax® has a Windows®* based operating system to enable users to improve shop floor flexibility and software productivity.

Companies using computer controlled machine tools are better able to:

•

maximize the efficiency of their human resources

•

make more advanced and complex parts from a wide range of materials using multiple processes

•

incorporate fast moving changes in technology into their operations to keep their competitive edge

•

integrate into the global supply chain of their customers by supporting small to medium lot sizes for “just in time” initiatives

Our Windows®* based control facilitates our ability to meet these customer needs. The familiar Windows®* operating system coupled with our intuitive conversational style of program creation allows our customers’ operators to create and edit part-making programs without incurring the incremental overhead of specialized computer aided design and computer aided manufacturing programmers. With the ability to transfer most computer aided design data directly into a Hurco program, programming time becomes minutes instead of hours.

Machine tool products today are being designed to meet the demand for machining complex parts with greater part accuracies. Our proprietary controls with WinMax® software and high speed processors efficiently handle the large amounts of data these complex part-making programs require, which enables our customers to create parts with higher accuracy at faster speeds. We continue to add technology to our control design as it becomes available.

Our offering of machining centers, currently equipped with either a twin touch-screen console or a single touch-screen console, consists of the following six product lines:

*Windows® is a registered trademark of Microsoft Corporation.

VM Product Line

The VM product line consists of moderately priced vertical machining centers for the entry-level market. Their design premise of a machining center with a large work cube and a small footprint optimizes the use of available floor space. The VM line consists of five models in three sizes with X-axis (horizontal) travels of 26, 40, and 50 inches. The base list prices of the VM machines range from $55,000 to $170,000.

VMX Product Line

The VMX product line consists of higher performing vertical machining centers aimed at manufacturers that require greater part accuracy. It is our flagship series of machining centers. The VMX line consists of fourteen models in seven sizes with X-axis travels of 24, 30, 42, 50, 60, 64, and 84 inches. The base list prices of VMX machines range from $70,000 to $300,000.

Five-Axis Product Line

The five-axis product line is targeted at manufacturers seeking to produce complex multi-sided parts in a single setup. Machines in this product line can yield significant productivity gains for manufacturers that previously had to process each side of a part separately. Due to growing market demand for increased processing efficiency, we continued to focus on five-axis technology in fiscal 2011. In total, we have nine five-axis machining centers to offer customers. The base list prices of the five-axis machines range from $120,000 to $350,000.

TM/TMM Product Line

Since its introduction in fiscal 2005, we have continued to expand the TM turning center (horizontal slant-bed lathe) product line. The TM series is designed for entry-level job shops and contract manufacturers seeking efficient processing of small to medium lot sizes. There are six TM models: the TM6, TM8, TM10, TM18L, and two new models, the TM12 and TM18. We added motorized tooling on the lathe turret to further enhance the capability of the TM turning centers and designated it as the TMM product line. These turning centers with live tooling allow our customers to complete a number of secondary milling, drilling and tapping operations while the part is still held in the chuck after the turning operations are complete, which provides significant productivity gains. We offer two TMM models. The base list prices of the TM/TMM machines range from $50,000 to $350,000.

TMX Product Line

The TMX product line consists of six high performance turning centers. Two of the models are equipped with an additional axis and motorized live tooling, and two models have an additional spindle. The base list prices of TMX turning centers range from $100,000 to $250,000.

Specialty Product Lines

This category includes three product series: the dual column DCX Series, the zone VTXZ Series, and the horizontal HTX Series. The zone VTXZ machining center is designed for production flexibility. The VTXZ can work as a dual work zone machine to support continuous production or a single zone to produce long, structural parts. Both the DCX Series and VTXZ Series are designed to facilitate production of large parts and molds often required by the aerospace and energy industries. The horizontal machining center (HTX) is also included in this category as it facilitates efficient and accurate machining of complex production parts. The base list prices of these machines range from $300,000 to $450,000.

Computer Control Systems and Software

The following machine tool computer control systems and software products are sold directly to end-users and/or to original equipment manufacturers.

Autobend®

Autobend® computer control systems are applied to metal bending press brake machines that form parts from sheet metal and steel plate. They consist of a microprocessor-based computer control and back gauge (an automated gauging system that determines where the bend will be made). We have manufactured and sold the Autobend® product line since 1968. We currently market two models of our Autobend® computer control systems for press brake machines, in combination with six different back gauges as retrofit units for installation on existing or new press brake machines.

Software Products

In addition to our standard computer control features, we offer software option products for two-dimensional programming. These products are sold to users of our computerized machine tools equipped with our twin touch-screen or single touch-screen consoles featuring WinMax® control software. The options include: Swept Surface, SelectSurface Finish Quality (SFQ), DXF Transfer, UltiMonitorTM, UltiMotionTM, UltiPocketTM, Conversational Part and Tool Probing, Advanced Verification Graphics, and Simultaneous Five-Axis Contouring.

Our Swept Surface software option simplifies programming of 3D contours and significantly reduces programming time.

SelectSurface Finish Quality (SFQ) lets the customer control surface finish quality and run time in one easy step.

The DXF Transfer software option can increase operator productivity because it eliminates manual data entry of part features by transferring AutoCADTM drawing files directly into our computer control or into our desktop programming software, WinMax® Desktop.

UltiMonitor is a web-based productivity, management and service tool, enabling customers to monitor, inspect and receive notifications about their Hurco machines from any location where they can access the internet. Customers can transfer part designs, receive event notifications via email or text, access diagnostic data, monitor the machine via webcam and communicate with the machine operator.

UltiMotion uses software-based motion control which is more efficient than conventional hardware-based motion control. This software-based motion control system provides significant cycle time reductions, minimizes machine jerk, and increases the quality of the part’s surface finish.

UltiPocketTM automatically calculates the tool path around islands, eliminating the arduous task of plotting these shapes. Islands can also be rotated, scaled and repeated.

Conversational Part and Tool Probing options permit the computerized dimensional measurement of machined parts and the associated cutting tools. This “on-machine” technique improves the throughput of the measurement process when compared to traditional “off-machine” approaches.

The Advanced Verification Graphics feature significantly reduces both scrap and programming time because it provides customers with a three-dimensional solid rendering of the part, including dynamic rotation. This feature allows a customer to view the rendered part from any angle without needing to redraw it.

Simultaneous Five-Axis Contouring software enables a five-axis machine to command motion concurrently on all axes. This allows the user to create continuous tool-paths along complex geometries with only a single machine/part setup, providing increased productivity along with the performance benefits of using shorter cutting tools. The sale of simultaneous five-axis contouring software is subject to government export licensing requirements.

Parts and Service

Our service organization provides installation, warranty, operator training and customer support for our products on a worldwide basis. In the United States, our principal distributors have primary responsibility for machine installation and warranty service and support for product sales. Our service organization also sells software options, computer control upgrades, accessories and replacement parts for our products. Our after-sales parts and service business strengthens our customer relationships and provides continuous information concerning the evolving requirements of end-users.

Manufacturing

Our computerized metal cutting machine tools are manufactured to our specifications primarily by our wholly owned subsidiary in Taiwan, Hurco Manufacturing Limited (HML). HML conducts final assembly operations and is supported by a network of contract suppliers of components and sub-assemblies who manufacture components for our products in accordance with our proprietary designs, quality standards and cost specifications. Our manufacturing facility in Ningbo, China, focuses on the machining of castings to support HML’s production in Taiwan as well as producing VM and TM machines specifically for the Chinese market.

We have a contract manufacturing agreement for computer control systems with Hurco Automation, Ltd., a Taiwanese company in which we have a 35% ownership interest. This company produces all of our computer control systems to our specifications, sources industry standard computer components and our proprietary parts, performs final assembly and conducts test operations.

We work closely with our subsidiaries, key component suppliers and our minority-owned affiliate to ensure that their production capacity will be sufficient to meet the projected demand for our machine tool products. Many of the key components used in our machines can be sourced from multiple suppliers. However, any prolonged interruption of operations or significant reduction in the capacity or performance capability at any of our manufacturing facilities, or at any of our key component suppliers, could have a material adverse effect on our operations.

Marketing and Distribution

We sell our products through more than 100 independent agents and distributors throughout North America, Europe and Asia. Although some distributors carry competitive products, we are the primary line for the majority of our distributors globally. We also have direct sales personnel in Canada, China, France, Germany, India, Italy, Poland, Singapore, South Africa, the United Kingdom and certain parts of the United States, which are among the world's principal machine tool consuming markets.

Approximately 95% of the worldwide demand for computerized machine tools and computer control systems is outside the United States. In fiscal 2011, more than 70% of our revenues were from overseas customers. No single end-user or distributor of our products accounted for more than 5% of our total sales and service fees.

The end-users of our products are precision tool, die and mold manufacturers, independent metal parts manufacturers, and specialized production application or prototype departments within large manufacturing companies. Industries served include aerospace, defense, medical equipment, energy, automotive/transportation, electronics and computer equipment.

We also sell our Autobend® computer control systems to original equipment manufacturers of new metal fabrication machine tools who integrate them with their own products prior to the sale of those products to their own customers, to retrofitters of used metal fabrication machine tools who integrate them with those machines as part of the retrofitting operation, and to end-users who have an installed base of metal fabrication machine tools, either with or without related computer control systems.

Demand

We believe demand for our products is driven by advances in industrial technology and the related demand for automated process improvements.

Other factors affecting demand include:

•

the need to continuously improve productivity and shorten cycle time

•

an aging machine tool installed base that will require replacement with more advanced technology

•

the industrial development of emerging markets in Asia and Eastern Europe

•

the declining supply of skilled machinists

Demand for our products is also highly dependent upon economic conditions and the general level of business confidence, as well as such factors as production capacity utilization and changes in governmental policies regarding tariffs, corporate taxation, fluctuations in foreign currencies, and other investment incentives.

Competition

We compete with many other machine tool producers in the United States and foreign countries. Most of our competitors are larger and have greater financial resources than our company. Major worldwide competitors include Deckel Maho Gildemeister Group (DMG), Mori Seiki Co., Ltd., Mazak, Haas Automation, Inc., Hardinge Inc., Doosan, Okuma Machinery Works Ltd., Milltronics, and MAG Industrial Automation Systems.

We strive to compete effectively by developing patentable software and other proprietary features that offer enhanced productivity, technological capabilities and ease of use. We offer our products in a range of prices and capabilities to target a broad potential market. We also believe that our competitiveness is aided by our reputation for reliability and quality, our strong international sales and distribution organization, and our extensive customer service organization.

Intellectual Property

We consider our products to be proprietary. Various features of our control systems and machine tools employ technologies covered by patents and trademarks that are material to our business. We also own additional patents covering new technologies that we have acquired or developed, and that we are planning to incorporate into our control systems in the future.

Research and Development

In the fiscal years set forth below, non-capitalized research and development expenditures for new products and significant product improvements and expenditures related to software development projects that were capitalized were as follows (in thousands):

Fiscal Year	Non-capitalized research and development		Capitalized software development
2011	$	2,500	$	1,100
2010		2,200		1,200
2009		2,500		2,000

Employees

We had approximately 520 full-time employees at the end of fiscal 2011, none of whom were covered by a collective-bargaining agreement or represented by a union. We have experienced no employee-generated work stoppages or disruptions and we consider our employee relations to be satisfactory.

Geographic Areas

Financial information about geographic areas in which we sell our products is set forth in Note 14 of Notes to Consolidated Financial Statements.

Some of the risks of doing business on a global basis are described in Item 1A. Risk Factors below.

Backlog

For information on orders and backlog, see Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Availability of Reports and Other Information

Our website can be found at www.hurco.com. We make available on this website, free of charge, access to our annual, quarterly and current reports and other documents filed by us with the Securities and Exchange Commission (SEC) as soon as reasonably practical after the filing date. These reports can also be obtained at the SEC’s Public Reference Room at 100 F Street, NE Washington, DC 20549.

Item 1A. RISK FACTORS

In this section we describe what we believe to be the material risks related to our business. The risks and uncertainties described below or elsewhere in this report are not the only ones to which we are exposed. Additional risks and uncertainties not presently known and/or risks we currently deem immaterial may also adversely affect our business and operations. If any of the developments included in the following risks were to occur, our business, financial condition, results of operations, cash flows or prospects could be materially adversely affected.

The cyclical nature of our business causes fluctuations in our operating results.

The machine tool industry is highly cyclical and changes in demand can occur abruptly in the geographic markets we serve. As a result of this cyclicality, we have experienced significant fluctuations in our sales, which, in periods of reduced demand, such as we experienced in fiscal 2009 and fiscal 2010, have adversely affected our results of operations and financial condition.

Uncertain economic conditions, particularly in Europe, may adversely affect overall demand.

Although we experienced substantial growth in sales and profitability in fiscal 2011, there can be no assurance that there will be a sustained recovery or that our performance will return to pre-recession levels in Europe where we sell most of our higher-performance VMX series machines. Currently, Europe is facing a debt crisis that could lead the entire region into an economic slowdown that would adversely affect our results of operations and financial condition.

Our international operations pose additional risks that may adversely impact sales and earnings.

During fiscal 2011, more than 70% of our revenues were derived from sales to customers located outside the United States. In addition, our manufacturing facilities are located outside of the United States. Our international operations are subject to a number of risks, including:

trade barriers

regional economic uncertainty

differing labor regulation

governmental expropriation

domestic and foreign customs and tariffs

current and changing regulatory environments affecting the importation and exportation of products and raw materials

difficulty in obtaining distribution support

difficulty in staffing and managing widespread operations

differences in the availability and terms of financing

political instability and unrest

changes in tax regulations and rates in foreign countries

Quotas, tariffs, taxes or other trade barriers could require us to change manufacturing sources, reduce prices, increase spending on marketing or product development, withdraw from or not enter certain markets or otherwise take actions that could be adverse to us. Also, in some foreign jurisdictions, we may be subject to laws limiting the right and ability of entities organized or operating therein to pay dividends or remit earnings to affiliated companies unless specified conditions are met. These factors may adversely affect our future operating results. The vast majority of our products are shipped from our manufacturing facility in Taiwan from the Port of Taichung to two ports of destination: Los Angeles, California, and Venlo, the Netherlands. Changes in customs requirements, as a result of national security or other constraints put upon these ports, may also have an adverse impact on our results of operations.

We depend on limited sources for our products.

Our wholly owned subsidiary in Taiwan, Hurco Manufacturing Ltd. (HML), produces the vast majority of our machine tools. An unplanned interruption in manufacturing at HML would have a material adverse effect on our results of operations and financial condition. Such an interruption could result from a change in the political environment in Taiwan or a natural disaster, such as an earthquake, typhoon, or tsunami. Any interruption in service by one of our key component suppliers, if prolonged, also could have a material adverse effect on our results of operations and financial condition.

Fluctuations in the exchange rates between the U.S. Dollar and any of several foreign currencies can increase our costs and decrease our revenues.

Our foreign sales generate more than 70% of our revenues, which are invoiced and received in several foreign currencies, primarily the Euro and Pound Sterling. Therefore, our results of operations and financial condition are affected by fluctuations in exchange rates between these currencies and the U.S. Dollar, both for purposes of actual conversion and for financial reporting purposes. In addition, we are exposed to exchange risk associated with our purchases of materials and components for our Taiwan manufacturing operations, which are primarily made in the New Taiwan Dollar. We hedge our foreign currency exposure with the purchase of forward exchange contracts. These hedge contracts only mitigate the impact of changes in foreign currency rates that occur during the term of the related contract period and carry risks of counter-party failure. There can be no assurance that our hedges will have their intended effects.

Our competitive position and prospects for growth may be diminished if we are unable to develop and introduce new and enhanced products on a timely basis that are accepted in the market.

The machine tool industry is subject to technological change, evolving industry standards, changing customer requirements, and improvements in and expansion of product offerings. Our ability to anticipate changes in technology, industry standards, customers’ requirements and competitors’ product offerings and to develop and introduce new and enhanced products on a timely basis that are accepted in the market, are significant factors in maintaining and improving our competitive position and growth prospects. If the technologies or standards used in our products become obsolete or fail to gain widespread commercial acceptance, our business would be materially adversely affected. Although we believe that we have the technological capabilities to remain competitive, developments by others may render our products or technologies obsolete or noncompetitive.

We compete with larger companies that have greater financial resources, and our business could be harmed by competitors’ actions.

The markets in which our products are sold are extremely competitive and highly fragmented. In marketing our products, we compete with other manufacturers in terms of quality, reliability, price, value, delivery time, service and technological characteristics. We compete with a number of U.S., European and Asian competitors, most of which are larger, have substantially greater financial resources and are supported by governmental or financial institution subsidies and therefore may have competitive advantages over us. While we believe our product lines compete effectively, our financial resources are limited compared to those of most of our competitors, making it challenging to remain competitive.

Fluctuations in the price of raw materials, especially steel and iron, could adversely affect our sales, costs and profitability.

We manufacture products with a high iron and steel content for which worldwide prices have been increasing. The availability and price for these and other raw materials are subject to volatility due to worldwide supply and demand forces, speculative actions, inventory levels, exchange rates, production costs and anticipated or perceived shortages. In some cases, those cost increases can be passed on to customers in the form of price increases; in other cases they cannot. If the prices of raw materials increase and we are not able to charge our customers higher prices to compensate, our results of operations would be adversely affected.

Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excess.

The technology within our products changes and generally new versions of machines are brought to market, in three-year to five-year cycles. The phasing out of an old product involves estimating the amount of inventory to hold to satisfy the final demand for those machines and to satisfy future repair part needs. Based on changing customer demand and expectations of delivery times for repair parts, we may find that we have either obsolete or excess inventory on hand. Because of unforeseen future changes in technology, market demand or competition, we might have to write off unusable inventory, which would adversely affect our results of operations.

We may make acquisitions that could disrupt our operations and harm our operating results.

Although we have no current plans for any material acquisitions, we may seek to expand our product offerings or the markets we serve by acquiring other companies, product lines, technologies and personnel. Acquisitions involve numerous risks, including the following:

difficulties integrating the operations, technologies, products, and personnel of the acquired companies

diversion of management’s attention from normal daily operations of the business

potential difficulties completing projects associated with in-process research and development

difficulties entering markets in which we have no or limited prior experience, especially when competitors in such markets have stronger market positions

initial dependence on unfamiliar supply chains or relatively small supply partners

insufficient revenues to offset increased expenses associated with acquisitions

the potential loss of key employees of the acquired companies

Acquisitions may also cause us to:

issue common stock that would dilute our current shareholders’ percentage ownership

assume liabilities

record goodwill and non-amortizable intangible assets that will be subject to impairment testing on a regular basis and potential periodic impairment charges

incur amortization expenses related to certain intangible assets

incur large and immediate write-offs, and restructuring and other related expenses

become subject to litigation

Mergers and acquisitions are inherently risky. No assurance can be given that our acquisitions will be successful. Further, no assurance can be given that acquisitions will not adversely affect our business, operating results, or financial condition. Failure to manage and successfully integrate acquisitions could harm our business and operating results in a material way. Even when an acquired company has already developed and marketed products, there can be no assurance that product enhancements will be made in a timely manner or that pre-acquisition due diligence will identify all possible issues that might arise with respect to such products.

Risks related to new product development also apply to acquisitions. For additional information, please see the risk factor above entitled, “Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excess.”

Assets may become impaired, requiring us to record a significant charge to earnings.

We review our assets for indications of impairment when events or changes in circumstances indicate the carrying value may not be recoverable. We could be required to record a significant charge to earnings in our financial statements for the period in which any impairment of these assets is determined, which would adversely affect our results of operations for that period.

We may experience negative or unforeseen tax consequences.

We may experience negative or unforeseen tax consequences. We review the probability of the realization of our net deferred tax assets each period based on forecasts of taxable income in both the U.S. and foreign jurisdictions. This review uses historical results, projected future operating results based upon approved business plans, eligible carryforward periods, tax-planning opportunities and other relevant considerations. Adverse changes in the profitability and financial outlook in the U.S. or foreign jurisdictions may require the creation of a valuation allowance to reduce our net deferred tax assets. Such changes could result in material non-cash expenses in the period in which the changes are made and could have a material adverse impact on our results of operations and financial condition.

Our continued success depends on our ability to protect our intellectual property.

Our future success depends in part upon our ability to protect our intellectual property. We rely principally on nondisclosure agreements, other contractual arrangements, trade secret law, trademark registration and patents to protect our intellectual property. However, these measures may be inadequate to protect our intellectual property from infringement by others or prevent misappropriation of our proprietary rights. In addition, the laws of some foreign countries do not protect proprietary rights to the same extent as do U.S. laws. Our inability to protect our proprietary information and enforce our intellectual property rights through infringement proceedings could have a material adverse effect on our business, financial condition and results of operations.

The unanticipated loss of current members of our senior management team and other key personnel may adversely affect our operating results.

The unexpected loss of senior management or other key personnel could impair our ability to carry out our business plan. We believe that our future success will depend in part on our ability to attract and retain highly skilled and qualified personnel. The loss of senior management or other key personnel may adversely affect our operating results as we incur costs to replace the departed personnel and potentially lose opportunities in the transition of important job functions.

Item 1B. UNRESOLVED STAFF COMMENTS

None.

Item 2. PROPERTIES

The following table sets forth the principal use, location, and size of each of our facilities:

Principal Uses	Locations	Square Footage

Corporate headquarters, design and engineering, product testing, sales and marketing, application engineering and customer service.	Indianapolis, Indiana, USA (1)	165,000

Manufacturing	Taichung, Taiwan	323,400
	Ningbo, China	61,200

Sales, design engineering, product testing and customer service.	Dexter, Michigan, USA	3,000

Sales, application engineering and customer service.	Mississauga, Canada High Wycombe, England	3,600 12,000
	Benoni, South Africa	2,500
	Paris and Toulouse, France	11,100
	Munich, Hagen and Roedermark, Germany	24,200
	Milan, Italy	10,800
	Tegelen, the Netherlands	800
	South Korea	700
	Singapore	6,300
	Shanghai, Guangzhou, Xi’an
	Ningbo, Chongqing, Shengyang and Beijing, China	19,800

	Chennai, India	8,100
	Liegnitz, Poland	2,900
	Grand Rapids, Michigan, USA	5,000
	Ball Ground, Georgia, USA	2,300

Warehouse, distribution, sales, application engineering and customer service.	Los Angeles, California, USA	13,100

(1)

Approximately 50,000 square feet is leased to a third-party under a lease that expires October 31, 2012.

We own the Indianapolis facility and lease all other facilities. The leases have terms expiring at various dates ranging from February 2012 to May 2017. We believe that all of our facilities are well maintained and are adequate for our needs now and in the foreseeable future. We do not believe that we would experience any difficulty in replacing any of the present facilities if any of our leases were not renewed at expiration.

Item 3. LEGAL PROCEEDINGS

We are involved in various claims and lawsuits arising in the normal course of business. We do not expect any of these claims, individually or in the aggregate, to have a material adverse effect on our financial position or results of operations.

Item 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.

Executive Officers of the Registrant

Executive officers are elected each year by the Board of Directors at the first board meeting following the Annual Meeting of Shareholders to serve during the ensuing year and until their respective successors are elected and qualified. There are no family relationships between any of our executive officers or between any of them and any of the members of the Board of Directors.

The following information sets forth as of October 31, 2011, the name of each executive officer and his or her age, tenure as an officer, principal occupation and business experience for the last five years:

Name	Age	Position(s) with the Company

Michael Doar	56	Chairman of the Board, Chief Executive Officer and President

John G. Oblazney	43	Vice President, Secretary, Treasurer and Chief Financial Officer

John P. Donlon	54	Executive Vice President, Worldwide Sales and Service

Sonja K. McClelland	40	Corporate Controller, Assistant Secretary

Gregory S. Volovic	47	Executive Vice President of Technology and Operations

Michael Doar was elected Chairman of the Board and Chief Executive Officer on November 14, 2001, and President effective October 31, 2009. Mr. Doar had held various management positions with Ingersoll Milling Machine Company from 1989 until 2001. Mr. Doar has been a director of Hurco since 2000.

John G. Oblazney was elected Vice President, Secretary, Treasurer and Chief Financial Officer in September 2006. Prior to joining us, Mr. Oblazney served as the Chief Financial Officer of Carrier Corporation’s Light Commercial Business, a division of United Technologies Corporation, since December 2005. Prior to that, Mr. Oblazney served in various other financial positions with Carrier Corporation from 2000 to 2005. Prior to joining Carrier Corporation, Mr. Oblazney was employed for six years with Cooper Industries and employed for three years by an international public accounting firm.

John P. Donlon has been employed by us since April 2010 as Executive Vice President, Worldwide Sales and Service. Prior to joining us, Mr. Donlon served as the Vice President of Sales for Yaskawa America Robotics since 2008. From 2004 to 2008, Mr. Donlon served as the Vice President of Sales and Marketing for Ansaldo STS, a worldwide supplier of automation technologies to the rail industry. Earlier in his career, Mr. Donlon held executive sales and management positions with other multi-national companies including Honeywell and ABB, and he has significant international experience in the emerging markets of China, Russia and Brazil.

Sonja K. McClelland has been employed by us since September 1996 and was elected as our Corporate Controller and Assistant Secretary in November 2004. Ms. McClelland served as Corporate Accounting Manager from September 1996 to 1999, then as Division Controller for Hurco USA from September 1999 to November 2004. Prior to joining us, Ms. McClelland was employed for three years by an international public accounting firm.

Gregory S. Volovic has been employed by us since March 2005 and has been Executive Vice President of Technology and Operations since October 2009. Mr. Volovic previously held the position of Executive Vice President, Software & Engineering. Prior to joining us, Mr. Volovic held various positions with Thomson, Inc. including Director of E-Business, Engineering, and Information Technology. Prior to that, Mr. Volovic was employed by Unisys Corporation.

PART II

Item 5. MARKET FOR THE REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is traded on the Nasdaq Global Select Market under the symbol “HURC”. The following table sets forth the high and low sale prices of the shares of our common stock for the periods indicated, as reported by the Nasdaq Global Select Market.

	2011				2010
Fiscal Quarter Ended:	High		Low		High		Low
January 31	$	26.84	$	18.01	$	18.59	$	13.83
April 30		32.82		23.25		20.18		16.11
July 31		35.07		27.69		19.50		14.29
October 31		30.47		17.45		19.15		15.53

On January 3, 2012, the closing price of our common stock on the Nasdaq Global Select Market was $21.97.

We do not currently pay dividends on our common stock and intend to continue to retain earnings for working capital and capital expenditures.

There were 170 holders of record of our common stock as of January 3, 2012.

During the period covered by this report, we did not sell any equity securities that were not registered under the Securities Act of 1933, as amended.

The disclosure under the caption “Equity Compensation Plan Information” is included in Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Item 6. SELECTED FINANCIAL DATA

The Selected Financial Data presented below has been derived from our consolidated financial statements for the years indicated and should be read in conjunction with the consolidated financial statements and related notes set forth elsewhere herein and Management’s Discussion and Analysis of Financial Condition and Results of Operations.

	Year Ended October 31,
	2011			2010			2009			2008			2007
	(Dollars in thousands, except per share amounts)
Statement of Operations Data:
Sales and service fees	$	180,400		$	105,893		$	91,016		$	223,994		$	188,047
Gross profit		55,874			21,796			25,828			82,617			71,082
Selling, general and administrative expenses		38,493			29,837			30,874			46,811			40,124
Operating income (loss)		17,381			(8,041	)		(5,046	)		35,806			30,958
Other income (expense)		(1,762	)		(818	)		1,234			(1,640	)		1,742
Net income (loss)		11,124			(5,744	)		(2,321	)		22,520			20,889
Earnings (loss) per common share- diluted		1.71			(0.89	)		(0.36	)		3.49			3.24
Weighted average common shares outstanding-diluted		6,472			6,441			6,429			6,444			6,440

	As of October 31,
	2011		2010		2009		2008		2007
	(Dollars in thousands)
Balance Sheet Data:
Current assets	$	164,074	$	136,208	$	118,264	$	151,312	$	139,265
Current liabilities		57,228		42,240		20,807		51,129		63,215
Working capital		106,846		93,968		97,457		100,183		76,050
Current ratio		2.9		3.2		5.7		3.0		2.2
Total assets		186,545		160,346		144,743		177,444		163,781
Non-current liabilities		3,105		3,366		3,560		2,838		2,963
Total debt		865		—		—		—		—
Shareholders’ equity		126,212		114,740		120,376		123,477		97,603

Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

EXECUTIVE OVERVIEW

Hurco Companies, Inc. is an industrial technology company operating in a single segment. We design and produce computerized machine tools, featuring our proprietary computer control systems and software, for sale through our own distribution network to the worldwide metal cutting market. We also provide software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training support.

The following overview is intended to provide a brief explanation of the principal factors that have contributed to our recent financial performance. This overview is intended to be read in conjunction with the more detailed information included in our audited financial statements that appear elsewhere in this report.

From 2004 until the recent recession, that began towards the end of Fiscal 2008, we had experienced sustained growth due to the strong worldwide demand for machine tools, the expansion of our product line to include higher-performance machines, increased customer acceptance of our products, and the strength of our selling and manufacturing operations outside the United States. In fiscal 2009 and 2010 we took steps to reduce production and operating costs. In fiscal 2011, worldwide demand for machine tools increased as global manufacturing rebounded from the recession and we were able to ramp up production and return to profitability.

The market for machine tools is international in scope. We have both significant foreign sales and foreign manufacturing operations. During the past three fiscal years, approximately 69% of our revenues were attributable to customers located in Europe and 7% of our sales were attributable to customers located in Asia. During fiscal 2011, 62% of our revenues were attributable to customers in Europe and 11% of our sales were attributable to customers in Asia, reflecting increased market demand in the Asia Pacific region where we sell more of our entry-level, lower-priced machines, but where we also encounter greater price pressures. In contrast, in Europe, we typically sell more of our higher-performance, higher-priced VMX series machines. We sell our products through more than 100 independent agents and distributors in countries throughout North America, Europe and Asia. We also have our own direct sales and service organizations in Canada, China, France, Germany, India, Italy, Poland, Singapore, South Africa, the United Kingdom and certain parts of the United States. The vast majority of our machine tools are manufactured to our specifications primarily by our wholly owned subsidiary in Taiwan, Hurco Manufacturing Limited (HML). Machine castings and components to support HML’s production are manufactured at our facility in Ningbo, China. We also manufacture machine tools for the Chinese market at the Ningbo plant.

Our sales to foreign customers are denominated, and payments by those customers are made, in the prevailing currencies—primarily the Euro and Pound Sterling—in the countries in which those customers are located. Our product costs are incurred and paid primarily in the New Taiwan Dollar and the U.S. Dollar. Changes in currency exchange rates may have a material effect on our operating results and consolidated balance sheets as reported under U.S. Generally Accepted Accounting Principles. For example, when the U.S. Dollar weakens in value relative to a foreign currency, sales made, and expenses incurred, in that currency when translated to U.S. Dollars for reporting in our financial statements, are higher than would be the case when the U.S. Dollar is stronger. In the comparison of our period-to-period results, we discuss the effect of currency translation on those results including the increases or decreases in those results as reported in our financial statements (which reflect translation to U.S. Dollars at exchange rates prevailing during the period covered by those financial statements) and also the effect that changes in exchange rates had on those results.

Our high levels of foreign manufacturing and sales also subject us to cash flow risks due to fluctuating currency exchange rates. We seek to mitigate those risks through the use of various derivative instruments – principally foreign currency forward exchange contracts.

As the global manufacturing industry began to rebound from the recession, we increased production at our manufacturing facilities to meet growing demand. Due to the increase in sales and efficiency realized from higher production levels, our gross margin rate for fiscal 2011 was 31.0%, compared to 20.6% for fiscal 2010.

Uncertain economic conditions, particularly in Europe, may adversely affect overall demand. Although we experienced substantial growth in sales and profitability in fiscal 2011, there can be no assurance that there will be a sustained recovery or that our performance will return to pre-recession levels in Europe where we sell more of our higher-performance VMX series machines. Currently, Europe is facing a debt crisis that could lead the entire region into an economic slowdown that would adversely affect our results of operations and financial condition.

Results of Operations

The following table presents, for the fiscal years indicated, selected items from the Consolidated Statements of Operations expressed as a percentage of our worldwide sales and service fees and the year-to-year percentage changes in the dollar amounts of those items.

	Percentage of Revenues									Year-to-Year % Change
	2011			2010			2009			Increase (Decrease)
										’11 vs. ’10			’10 vs. ’09
Sales and service fees		100.0	%		100.0	%		100.0	%		70.4	%		16.3	%
Gross profit		31.0	%		20.6	%		28.4	%		156.3	%		(15.6	)%
Selling, general and administrative expenses		21.3	%		28.2	%		33.9	%		29.0	%		(3.4	)%
Operating income (loss)		9.6	%		(7.6	)%		(5.5	)%		316.2	%		(59.4	)%
Other income (expense)		(1.0	)%		(0.8	)%		1.4	%		(115.4	)%		(166.3	)%
Net income (loss)		6.2	%		(5.4	)%		(2.6	)%		293.7	%		(147.5	)%

Fiscal 2011 Compared to Fiscal 2010

Sales and Service Fees. Annual sales and service fees for fiscal 2011 were $180.4 million, an increase of $74.5 million, or 70.4%, from fiscal 2010. A weaker U.S. Dollar when translating foreign sales to U.S. Dollars had a favorable impact of approximately 4%, or $4.3 million, on the year-to-year comparison.

Net Sales and Service Fees by Geographic Region

The following table sets forth net sales and service fees by geographic region for the fiscal years ended October 31, 2011 and 2010 (in thousands):

	October 31,								Increase (Decrease)
	2011				2010				Amount		%
North America	$	49,637	27.5	%	$	27,818	26.3	%	$	21,819		78.4	%
Europe		111,080	61.6	%		65,678	62.0	%		45,402		69.1	%
Asia Pacific		19,683	10.9	%		12,397	11.7	%		7,286		58.8	%
Total	$	180,400	100.0	%	$	105,893	100.0	%	$	74,507		70.4	%

The significant percentage increase in sales during fiscal 2011 was primarily the result of higher customer demand as a result of a rebound in industrial manufacturing activity and our ability to increase production to meet demand. In fiscal 2011, unit shipments increased 72% in North America, 51% in Europe and 46% in Asia compared to fiscal 2010.

Net Sales and Service Fees by Product Category

The following table sets forth net sales and service fees by product category for the years ended October 31, 2011 and 2010 (in thousands):

	October 31,								Increase
	2011				2010				Amount		%

Computerized Machine Tools	$	156,736	86.9	%	$	88,184	83.3	%	$	68,552		77.7	%

Service Fees, Parts and Other		23,664	13.1	%		17,709	16.7	%		5,955		33.6	%

Total	$	180,400	100.0	%	$	105,893	100.0	%	$	74,507		70.4	%

Orders and Backlog. New order bookings in fiscal 2011 were $197.0 million, an increase of $81.7 million, or 70.8%, over the prior year. Orders in fiscal 2011 increased over fiscal 2010 by $17.9 million (or 56%) in North America, by $53.0 million (or 77%) in Europe, and $10.8 million (or 73%) in the Asia Pacific region. The effect of a weaker U.S. Dollar in 2011 when translating foreign orders to U.S. Dollars for financial reporting purposes had a favorable impact of $3.7 million, or 3.2%, on the year-to-year comparison. Unit orders increased 41% in North America, 57% in Europe and 66% in the Asia Pacific region. Backlog was $31.9 million at October 31, 2011, compared to $15.6 million at October 31, 2010. We do not believe backlog is a useful measure of past performance or indicative of future performance. Backlog orders as of October 31, 2011 are expected to be fulfilled in fiscal 2012.

Gross Profit. Gross profit for fiscal 2011 was $55.9 million, or 31.0% of sales, compared to $21.8 million, or 20.6% of sales for fiscal 2010. The year-over-year improvement in gross profit was primarily related a general increase in volume of sales year-over-year, particularly in Europe, the primary market for our higher-performance VMX series machines, and the increased cost efficiencies realized from higher production levels during fiscal 2011. However, gross profit for fiscal 2011 was adversely impacted by higher raw material costs, primarily for metals, as well as the appreciation of the Taiwanese Dollar. We increased selling prices across all product offerings at the end of the second quarter of fiscal 2011 to offset these higher costs.

Operating Expenses. Selling, general and administrative expenses were $38.5 million for fiscal 2011, an increase of $8.7 million, or 29.0%, from fiscal 2010. The increase consisted primarily of higher sales commissions due to increased sales volume, higher global sales and marketing expense, and increased wages and compensation paid to employees who had experienced wage reductions when cost containment measures were implemented during fiscal 2009 and 2010. Despite the dollar increase, the increased sales in fiscal 2011 resulted in selling, general and administrative expenses being 21.3% of sales and service fees compared to 28.2% for fiscal 2010.

Operating Income (Loss). Operating income for fiscal 2011 was $17.4 million, or 9.6% of sales, compared to an operating loss of $8.0 million, or 7.6% of sales, in fiscal 2010. The substantial improvement in operating income year-over-year was primarily due to the significant increase in sales in fiscal 2011.

Other (Income) Expense. The $1.1 million decrease in other income for fiscal 2011 in comparison to fiscal 2010 was primarily due to net realized and unrealized losses from foreign currency fluctuations on payables and receivables, net of foreign currency forward exchange contracts.

Provision (Benefit) for Income Taxes. Our effective tax rate for fiscal 2011 was an expense of 28.8%, compared to a benefit of 35.2% for fiscal 2010. The reduction in the effective tax rate for the year was primarily due to changes in the geographic mix of income or loss between tax jurisdictions with statutory tax rates ranging from 17% to 37%.

Net Income (Loss). Net income for fiscal 2011 was $11.1 million, or $1.71 per diluted share, which is an increase of $16.8 million from fiscal 2010 net loss of $5.7 million, or $0.89 per diluted share.

Fiscal 2010 Compared to Fiscal 2009

Sales and Service Fees. Annual sales and service fees for fiscal 2010 were $105.9 million, an increase of $14.9 million, or 16.3%, from fiscal 2009. There was no material impact on the year-over-year increase due to foreign currency translation.

In fiscal 2009 and the first three quarters of fiscal 2010, our net sales were materially adversely affected by the global recession as customers deferred or eliminated investments in capital equipment. Additionally, customers who might otherwise have been willing to purchase capital goods found it difficult to obtain financing due to the contraction of the credit markets. During the fourth quarter of fiscal 2010 we began to experience an increase in sales as global manufacturing activity started to recover.

Net Sales and Service Fees by Geographic Region

The following table sets forth net sales and service fees by geographic region for the fiscal years ended October 31, 2010 and 2009 (in thousands):

	October 31,								Increase (Decrease)
	2010				2009				Amount		%
North America	$	27,818	26.3	%	$	25,652	28.2	%	$	2,167		8.4	%
Europe		65,678	62.0	%		60,132	66.1	%		5,547		9.2	%
Asia Pacific		12,397	11.7	%		5,232	5.7	%		7,163		136.9	%
Total	$	105,893	100.0	%	$	91,016	100.0	%	$	14,877		16.3	%

The significant percentage increase in sales in the Asia Pacific region during fiscal 2010 was primarily the result of substantially increased market penetration in China and India, strong demand for our entry-level, lower-priced machines, as well as continued growing demand in the other Asia Pacific territories. In fiscal 2010, unit shipments decreased 5% in North America, increased by 10% in Europe and 157% in Asia compared to fiscal 2009.

Net Sales and Service Fees by Product Category

The following table sets forth net sales and service fees by product category for the years ended October 31, 2010 and 2009 (in thousands):

	October 31,								Increase
	2010				2009				Amount		%

Computerized Machine Tools	$	88,184	83.3	%	$	75,213	82.6	%	$	12,971		17.2	%

Service Fees, Parts and Other		17,709	16.7	%		15,803	17.4	%		1,906		12.1	%

Total	$	105,893	100.0	%	$	91,016	100.0	%	$	14,877		16.3	%

Orders and Backlog. New order bookings in fiscal 2010, were $115.3 million, an increase of $34.7 million, or 43.1%, over the prior year. Approximately half of the year-over-year increase in orders occurred in the fourth quarter of fiscal 2010, reflecting strong customer demand in all geographic sales regions. Orders increased in North America by $8.9 million, or 38%, in Europe by $14.8 million, or 28%, and in the Asia Pacific region by $11.0 million, or by 288%, in each case as compared to fiscal 2009. Orders for fiscal 2010 as a whole were unfavorably affected by approximately $281,000, or 0.8%, compared to fiscal 2009 due to changes in currency exchange rates. Unit orders increased 25% in North America, 27% in Europe and 281% in the Asia Pacific region. Backlog was $15.6 million at October 31, 2010, compared to $6.3 million at October 31, 2009. We do not believe backlog is a useful measure of past performance or indicative of future performance. Backlog orders as of October 31, 2010 were fulfilled in fiscal 2011.

Gross Profit. Gross profit as a percentage of sales for fiscal 2010 was 20.6%, compared to 28.4% for fiscal 2009. The decrease in profit as a percentage of sales was the result of higher allocated fixed costs per machine as machines we sold during the period were produced at a time of reduced production levels. Also contributing to the decrease in gross profit was a product mix that included a greater amount of our entry-level machines that were in high demand in the Asia Pacific region where competitive price pressure is a strong factor.

Operating Expenses. Selling, general and administrative expenses were $29.8 million for fiscal 2010, a decrease of $1.0 million, or 3.4%, from fiscal 2009. These reductions reflect the benefits of cost reduction initiatives implemented during the recession.

Operating Income (Loss). We incurred an operating loss for fiscal 2010 of $8.0 million, or 7.6% of sales, compared to an operating loss of $5.0 million, or 5.5% of sales, in fiscal 2009. The increase in the operating loss year-over-year was primarily the result of higher allocated fixed costs per machine due to reduced production levels. Also contributing to the increase in operating loss was a product mix that included a greater amount of our entry-level machines that were in high demand in the Asia Pacific region.

Other (Income) Expense. The $2.1 million decrease in other income for fiscal 2010 in comparison to fiscal 2009 was primarily due to net realized gains of $2.0 million in fiscal 2009 from cash flow hedges of forecasted inter-company sales and purchases that became ineffective as we reduced production levels during that year.

Provision (Benefit) for Income Taxes. Our effective tax rate for fiscal 2010 was a benefit of 35.2%, compared to a benefit of 39.1% for fiscal 2009. The change in the effective tax rate was primarily due to the net impact of recording a valuation allowance on our state net operating loss carry-forwards and the reversal of tax reserves for uncertain tax positions taken in previous years now expiring due to statutes of limitations. We regularly review our recent results and projected future results of operations, as well as other relevant factors, to reconfirm the likelihood that our state net operating loss carry-forwards in each tax jurisdiction would be fully recoverable.

Net Income (Loss). Net loss for fiscal 2010 was $5.7 million, or $0.89 per diluted share, which is a decrease of $3.4 million from fiscal 2009 net loss of $2.3 million, or $0.36 per diluted share.

Liquidity and Capital Resources

At October 31, 2011, we had cash and cash equivalents of $45.0 million compared to $48.3 million at October 31, 2010. This decrease in cash was primarily the result of increased finished goods inventory and higher production levels.

Approximately 59.1% of the $45.0 million of cash and cash equivalents is held in the U.S. The remaining balances which are denominated in various foreign currencies are held by our foreign subsidiaries. These balances are associated with our permanent reinvestment strategy and are subject to fluctuations in currency exchange rates. We do not believe that the indefinite reinvestment of these funds offshore impairs our ability to meet our domestic working capital needs.

Working capital, excluding cash, was $61.9 million at October 31, 2011, compared to $45.7 million at October 31, 2010. The increase in working capital, excluding cash, was primarily due to an increase in finished goods inventory as we increased production during the year to meet the improving market demand.

Inventories were $81.1 million at October 31, 2011, compared to $55.9 million at October 31, 2010. The $25.2 million increase was due to increased finished goods inventory to support the 70% increase in sales. Inventory turns remained relatively stable from 1.5 turns as of October 31, 2010 to 1.6 turns as of October 31, 2011.

Capital expenditures were $2.8 million in fiscal 2011, $1.8 million in fiscal 2010, and $3.7 million in fiscal 2009. Capital expenditures for 2011 were primarily for implementation of operating systems, purchase of factory equipment for production facilities in Taiwan and software development costs. We funded these expenditures with cash flow from operations.

At October 31, 2011, we had $865,000 of borrowings outstanding under our credit facility in China and had no other borrowings under any other credit facilities. At October 31, 2011, we were in compliance with those covenants contained in all of our credit facilities and had $24.3 million available for borrowings under those facilities.

We believe our cash position and borrowing capacity under our credit facilities provide for adequate liquidity to fund our operations and keep us committed to our strategic plan for product innovation and targeted penetration of developing markets.

Although we have not made any significant acquisitions in the recent past, we continue to receive and review information on businesses and assets, including intellectual property assets, which are available for purchase.

Contractual Obligations and Commitments

The following is a table of contractual obligations and commitments as of October 31, 2011 (all amounts in thousands):

Payments Due by Period
	Total		Less than 1 Year		1-3 Years		3-5 Years		More than 5 Years
Short-term debt	$	865	$	865	$	—	$	—	$	—
Operating Leases		6,374		2,769		3,161		391		53
Other		1,123		—		—		—		1,123
Total	$	8,362	$	3,634	$	3,161	$	391	$	1,176

In addition to the contractual obligations and commitments disclosed above, we also have a variety of other obligations for the procurement of materials and services, none of which subject us to any material non-cancelable commitments. While some of these obligations arise under long-term supply agreements, we are not committed under these agreements to accept or pay for requirements that are not needed to meet our production needs. We have no material minimum purchase commitments or “take-or-pay” type agreements or arrangements. Unrecognized tax benefits in the amount of approximately $275,000 have been excluded from the table above because we are unable to determine a reasonably reliable estimate of the timing of future payment.

We expect capital spending in fiscal 2012 to be approximately $2.5 million, which includes investments for capitalized software, capital equipment and costs to continue implementation of our integrated computer system. We expect to fund these commitments with cash on hand and cash generated from operations.

Off Balance Sheet Arrangements

From time to time, our subsidiaries guarantee third party payment obligations in connection with the sale of machines to customers that use financing. As of October 31, 2011, we had 23 outstanding third party payment guarantees totaling approximately $1.2 million. The terms of these guarantees are consistent with the underlying customer financing terms. Upon shipment of a machine, the customer has the risk of ownership. The customer does not obtain title, however, until it has paid for the machine. A retention of title clause allows us to recover the machine if the customer defaults on the financing. We accrue for potential liabilities under these guarantees when we believe a loss is probable and can be estimated.

We provide warranties on our products with respect to defects in material and workmanship. The terms of these warranties are generally one year for machines and shorter periods for service parts. We recognize a reserve with respect to this obligation at the time of product sale, with subsequent warranty claims recorded against the reserve. The amount of the warranty reserve is determined based on historical trend experience and any known warranty issues that could cause future warranty costs to differ from historical experience.

Critical Accounting Policies and Estimates

Our discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with U.S. Generally Accepted Accounting Principles. The preparation of financial statements in conformity with those accounting principles require us to make judgments and estimates that affect the amounts reported in the consolidated financial statements and accompanying notes. Those judgments and estimates have a significant effect on the financial statements because they result primarily from the need to make estimates about the effects of matters that are inherently uncertain. Actual results could differ from those estimates. Our accounting policies, including those described below, are frequently evaluated as our judgment and estimates are based upon historical experience and on various other assumptions that are believed to be reasonable under the circumstances.

Revenue Recognition - We recognize revenue from sales of our machine tool systems upon delivery of the product to the customer, which is normally at the time of shipment, because persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. In certain foreign locations, we retain title after shipment under a “retention of title” clause solely to protect collectability. The retention of title is similar to Uniform Commercial Code (“UCC”) filings in the United States and provides the creditor with additional rights to the machine if the customer fails to pay. Revenue recognition at the time of shipment is appropriate in this instance as long as all risks of ownership have passed to the buyer. Our computerized machine tools are general-purpose computer controlled machine tools that are typically used in stand-alone operations. Transfer of ownership and risk of loss are not contingent upon contractual customer acceptance. Prior to shipment, we test each machine to ensure the machine’s compliance with standard operating specifications as listed in our sales literature.

Depending upon geographic location, after shipment, a machine may be installed at the customer’s facilities by a distributor, independent contractor or by one of our service technicians. In most instances where a machine is sold through a distributor, we have no installation involvement. If sales are direct or through sales agents, we will typically complete the machine installation, which consists of the reassembly of certain parts that were removed for shipping and the re-testing of the machine to ensure that it is performing within the standard specifications. We consider the machine installation process to be inconsequential and perfunctory.

Service fees from maintenance contracts are deferred and recognized in earnings on a pro rata basis over the term of the contract. Sales related to software products are recognized when shipped. The software does not require production, modification or customization and at the time of shipment persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured.

Inventories – We determine at each balance sheet date how much, if any, of our inventory may ultimately prove to be unsalable or unsalable at its carrying cost. Reserves are established to effectively adjust the carrying value of such inventory to net realizable value. To determine the appropriate level of valuation reserves, we evaluate current stock levels in relation to historical and expected patterns of demand for all of our products. We evaluate the need for changes to valuation reserves based on market conditions, competitive offerings and other factors on a regular basis.

Income Taxes – Deferred tax assets and liabilities are measured using enacted income tax rates in each jurisdiction in effect for the year in which the temporary differences are expected to be recovered or settled. These deferred tax assets are reduced by a valuation allowance, which is established when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Our judgment regarding the realization of deferred tax assets may change due to future profitability and market conditions, changes in U.S. or foreign tax laws and other factors. These changes, if any, may require material adjustments to these deferred tax assets and an accompanying reduction or increase in net income in the period when such determinations are made.

The determination of our provision for income taxes requires judgment, the use of estimates and the interpretation and application of complex tax laws. Our provision for income taxes reflects a combination of income earned and taxed at the federal and state level in the U.S., as well as in various foreign jurisdictions. We have not provided for any U.S. income taxes on the undistributed earnings of our foreign subsidiaries or equity method investments based upon our determination that such earnings will be indefinitely reinvested abroad.

In addition to the risks to the effective tax rate described above, the future effective tax rate reflected in forward-looking statements is based on currently effective tax laws. Significant changes in those laws could materially affect these estimates.

We recognize uncertain tax positions when it is more likely than not that the tax position will be sustained upon examination by relevant taxing authorities, based on the technical merits of the position. The amount recognized is measured as the largest amount of benefit that is greater than 50 percent likely of being realized upon ultimate settlement.

Capitalized Software Development Costs – Costs incurred to develop new computer software products and significant enhancements to software features of existing products are capitalized as required by FASB guidance relating to accounting for the costs of computer software to be sold, leased, or otherwise marketed, and amortized over the estimated product life of the related software. The determination as to when in the product development cycle technological feasibility has been established, and the expected product life, require judgments and estimates by management and can be affected by technological developments, innovations by competitors and changes in market conditions affecting demand. We periodically review the carrying values of these assets and make judgments as to ultimate realization considering the above-mentioned risk factors.

Derivative Financial Instruments – Critical aspects of our accounting policy for derivative financial instruments include conditions that require that critical terms of a hedging instrument are essentially the same as a hedged forecasted transaction. Another important element of our policy demands that formal documentation be maintained as required by FASB guidance relating to accounting for derivative instruments and hedging activities. Failure to comply with these conditions would result in a requirement to recognize changes in market value of hedge instruments in earnings. We routinely monitor significant estimates, assumptions, and judgments associated with derivative instruments, and compliance with formal documentation requirements.

Stock Compensation – We account for share-based compensation according to FASB guidance relating to share based payments, which requires the measurement and recognition of compensation expense for all share-based awards made to employees and directors based on estimated fair values on the grant date. This guidance requires that we estimate the fair value of share-based awards on the date of grant and recognize as expense the value of the portion of the award that is ultimately expected to vest over the requisite service period.

Item 7a. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISKS

Interest Rate Risk

Interest on borrowings on our bank credit agreements are tied to prevailing domestic and foreign interest rates. At October 31, 2011, we had $865,000 of borrowings outstanding under our credit facility in China, but had no other debt or borrowings under any of our other bank credit facilities.

Foreign Currency Exchange Risk

In fiscal 2011, we derived more than 70% of our revenues from foreign markets. All of our computerized machine tools and computer control systems assembled in Taiwan, as well as certain proprietary service parts, are sourced by our U.S.-based engineering and manufacturing division and re-invoiced to our foreign sales and service subsidiaries, primarily in their functional currencies.

Our products are sourced from foreign suppliers or built to our specifications by either our wholly owned subsidiaries in Taiwan and China or an affiliated contract manufacturer in Taiwan. Our purchases are predominantly in foreign currencies and in some cases our arrangements with these suppliers include foreign currency risk sharing agreements, which reduce (but do not eliminate) the effects of currency fluctuations on product costs. The predominant portion of the exchange rate risk associated with our product purchases relates to the New Taiwan Dollar.

We enter into foreign currency forward exchange contracts from time to time to hedge the cash flow risk related to forecasted inter-company sales and purchases denominated in, or based on, foreign currencies (primarily the Euro, Pound Sterling, and New Taiwan Dollar). We also enter into foreign currency forward exchange contracts to protect against the effects of foreign currency fluctuations on receivables and payables denominated in foreign currencies. We do not speculate in the financial markets and, therefore, do not enter into these contracts for trading purposes.

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2011, which are designated as cash flow hedges under FASB guidance related to accounting for derivative instruments and hedging activities were as follows:

	Notional Amount		Weighted Avg.			Contract Amount at Forward Rates in U.S. Dollars
Forward Contracts	in Foreign Currency		Forward Rate			Contract Date		October 31, 2011		Maturity Dates
Sale Contracts:
Euro		31,420,000		1.3994		$	43,967,797	$	43,717,542	Nov 2011-Oct 2012
Sterling		6,510,000		1.5995		$	10,412,881	$	10,482,926	Nov 2011-Oct 2012
Purchase Contracts:
New Taiwan Dollar		775,000,000		28.72	*	$	26,985,912	$	26,058,597	Nov 2011-Oct 2012

*NT Dollars per U.S. Dollar

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2011, which were entered into to protect against the effects of foreign currency fluctuations on receivables and payables and are not designated as hedges under this guidance denominated in foreign currencies, were as follows:

						Contract Amount at Forward Rates in U.S. Dollars
Forward Contracts	Notional Amount in Foreign Currency		Weighted Avg. Forward Rate			Contract Date		October 31, 2011		Maturity Dates
Sale Contracts:
Euro		15,942,315		1.4190		$	22,622,748	$	22,183,383	Nov 2011 – Apr 2012
Pound Sterling		1,158,950		1.6033		$	1,858,167	$	1,868,976	Nov 2011
Canadian Dollar		527,465		1.0067		$	531,023	$	529,462	Jan 2012
South African Rand		4,662,812		0.1282		$	597,662	$	583,471	Jan 2012
Singapore Dollar		188,289		0.8283		$	155,959	$	150,341	Dec 2011
Purchase Contracts:
New Taiwan Dollar		453,724,699		29.91	*	$	15,168,249	$	15,166,872	Nov 2011 – Dec 2011

* NT Dollars per U.S. Dollar

We are exposed to foreign currency exchange risk related to our investment in net assets in foreign countries. To manage this risk, we entered into a forward contract with a notional amount of €3.0 million. We designated this forward contract as a hedge of our net investment in Euro denominated assets. We selected the forward method under the FASB guidance related to the accounting for derivatives instruments and hedging activities. The forward method requires all changes in the fair value of the forward to be reported as a cumulative translation adjustment in Accumulated Other Comprehensive Loss, net of tax, in the same manner as the underlying hedged net assets. This forward contract matured on November 23, 2010 and we entered into a new forward contract for the same notional amount that is set to mature in November 2011. As of October 31, 2011, we had a realized gain of $216,000 and an unrealized loss of $70,000, net of tax, recorded as cumulative translation adjustments in Accumulated Other Comprehensive Loss, related to these forward contracts.

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2011, which are designated as net investment hedges under this guidance were as follows:

Notional

Amount

Weighted

Avg.

Contract Amount at Forward

Rates in

U.S. Dollars

Forward Contracts

in Foreign

Currency

Forward

Rate

Contract

Date

October 31,

2011

Maturity Date

Sale Contracts:

Euro

3,000,000

1.3549

4,064,700

4,175,910

Nov 2011

Management’s Annual Report on Internal Control Over Financial Reporting

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.:

Management of Hurco Companies, Inc. (the “Company”), has assessed the effectiveness of internal controls over financial reporting as of October 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Management is responsible for these financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting.

Because of its inherent limitations, the Company’s internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In management’s opinion, the Company’s internal controls over financial reporting as of October 31, 2011, are effective based on the criteria specified above.

Our independent registered accounting firm, Ernst & Young LLP, who also audited our consolidated financial statements, audited the effectiveness of our internal control over financial reporting as of October 31, 2011. Ernst & Young has issued their attestation report, which is included in Part II, Item 8 of this Annual Report on Form 10-K.

/s/ Michael Doar
Michael Doar,
Chairman of the Board, Chief Executive Officer and President

/s/ John G. Oblazney
John G. Oblazney,
Vice President & Chief Financial Officer

/s/ Sonja K. McClelland
Sonja K. McClelland
Corporate Controller, Assistant Secretary
(Principal Accounting Officer)

Indianapolis, Indiana

January 13, 2012

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Report of Independent Registered Public Accounting Firm

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

We have audited the accompanying consolidated balance sheets of Hurco Companies, Inc. as of October 31, 2011 and 2010 and the related consolidated statements of operations, changes in shareholders’ equity and cash flows for each of the three years in the period ended October 31, 2011. Our audits also included the financial statement schedule listed at Item 15(a) for each of the three years in the period ended October 31, 2011. These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Hurco Companies, Inc. at October 31, 2011 and 2010 and the consolidated results of its operations and its cash flows for each of the years in the period ended October 31, 2011 in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule for each of the three years in the period ended October 31, 2011, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2011, based on criteria established in Internal Control – Integrated Framework issued by the Commission of Sponsoring Organizations of the Treadway Commission and our report dated January 13, 2012 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Indianapolis, Indiana
January 13, 2012

Report of Independent Registered Public Accounting Firm

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

We have audited Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2011, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Hurco Companies, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or, disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Hurco Companies, Inc. maintained, in all material respects, effective internal control over financial reporting as of October 31, 2011, based on the COSO criteria.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Hurco Companies, Inc. as of October 31, 2011 and 2010 and the related consolidated statements of operations, changes in shareholders’ equity and cash flows for each of the three years in the period ended October 31, 2011 of Hurco Companies, Inc. and our report dated January 13, 2012 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Indianapolis, Indiana
January 13, 2012

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

	Year Ended October 31,
	2011		2010			2009
	(In thousands, except per share amounts)

Sales and service fees	$	180,400	$	105,893		$	91,016

Cost of sales and service		124,526		84,097			65,188

Gross profit		55,874		21,796			25,828

Selling, general and administrative expenses		38,493		29,837			30,874

Operating income (loss)		17,381		(8,041	)		(5,046	)

Interest expense		143		49			35

Interest income		132		86			190

Investment income		13		14			16

Earnings (losses) from equity investments		53		(149	)		(326	)

Other (income) expense, net		1,817		720			(1,389	)

Income (loss) before income taxes		15,619		(8,859	)		(3,812	)

Provision (benefit) for income taxes		4,495		(3,115	)		(1,491	)

Net income (loss)	$	11,124	$	(5,744	)	$	(2,321	)

Earnings (loss) per common share – basic	$	1.72	$	(0.89	)	$	(0.36	)

Weighted average common shares outstanding – basic		6,441		6,441			6,429

Earnings (loss) per common share – diluted	$	1.71	$	(0.89	)	$	(0.36	)

Weighted average common shares outstanding – diluted		6,472		6,441			6,429

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED BALANCE SHEETS

	As of October 31,
		2011			2010
	( In thousands, except share and per share data)
ASSETS
Current assets:
Cash and cash equivalents		$	44,961		$	48,255
Accounts receivable, less allowance for doubtful accounts of $608 in 2011 and $497 in 2010			27,057			20,114
Refundable taxes			1,442			5,093
Inventories, net			81,127			55,866
Deferred income taxes, net			2,692			2,467
Derivative assets			1,197			905
Other			5,598			3,508
Total current assets			164,074			136,208

Property and equipment:
Land			782			782
Building			7,116			7,116
Machinery and equipment			16,336			15,095
Leasehold improvements			2,508			2,183
			26,742			25,176
Less accumulated depreciation and amortization			(15,198	)		(13,424	)
			11,544			11,752
Software development costs, less accumulated amortization			4,928			6,042
Investments and other assets, net			5,999			6,344
		$	186,545		$	160,346

LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Accounts payable		$	36,335		$	28,715
Accounts payable-related parties			2,711			1,679
Accrued expenses and other			13,983			8,132
Accrued warranty expenses			1,725			1,591
Derivative liabilities			1,609			2,123
Short-term debt			865			—
Total current liabilities			57,228			42,240

Non-current liabilities:
Deferred income taxes, net			1,982			2,335
Deferred credits and other			1,123			1,031
			3,105			3,366
Commitments and contingencies
Shareholders’ equity:
Preferred stock: no par value per share, 1,000,000 shares authorized, no shares issued			—			—
Common stock: no par value, $.10 stated value per share, 12,500,000 shares authorized, 6,471,710 and 6,440,851 shares issued; and 6,440,851 and 6,440,851 shares outstanding, as of October 31, 2011 and October 31, 2010, respectively			644			644
Additional paid-in capital			52,614			52,144
Retained earnings			74,948			63,824
Accumulated other comprehensive loss			(1,994	)		(1,872	)
Total shareholders’ equity			126,212			114,740
		$	186,545		$	160,346

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

	Year Ended October 31,
	2011			2010			2009
	(In thousands)
Cash flows from operating activities:
Net income (loss)	$	11,124		$	(5,744	)	$	(2,321	)
Adjustments to reconcile net income (loss) to net cash provided by (used for) operating activities:
Provision for doubtful accounts		111			(312	)		131
Deferred income taxes		1,372			(216	)		(2,824	)
Equity in (income) loss of affiliates		(53	)		149			326
Foreign currency (gain) loss		311			1,927			(6,422	)
Unrealized (gain) loss on derivatives		(720	)		(624	)		4,058
Depreciation and amortization		4,300			3,804			3,295
Stock-based compensation		470			141			246
Change in assets and liabilities:
(Increase) decrease in accounts receivable and
refundable taxes		(3,395	)		(4,047	)		14,262
(Increase) decrease in inventories		(25,702	)		4,154			11,409
Increase (decrease) in accounts payable		8,085			21,114			(20,524	)
Increase (decrease) in accrued expenses		5,922			(398	)		(9,610	)
Net change in derivative assets and liabilities		(330	)		(174	)		3,261
Other		(2,690	)		1,978			3,230
Net cash provided by (used for) operating activities		(1,195	)		21,752			(1,483	)

Cash flows from investing activities:
Proceeds from sale of property and equipment		—			40			239
Purchase of property and equipment		(1,745	)		(632	)		(1,679	)
Sale of investments		—			—			6,674
Software development costs		(1,097	)		(1,216	)		(2,020	)
Other proceeds (investments)		(34	)		50			(889	)
Net cash provided by (used for) investing activities		(2,876	)		(1,758	)		2,325

Cash flows from financing activities:
Tax benefit from exercise of stock options		—			—			26
Proceeds from exercise of common stock options		—			—			43
Borrowings on short-term debt		844			—			—
Net cash provided by financing activities		844			—			69

Effect of exchange rate changes on cash		(67	)		(521	)		1,477
Net increase (decrease) in cash		(3,294	)		19,473			2,388

Cash and cash equivalents at beginning of year		48,255			28,782			26,394

Cash and cash equivalents at end of year	$	44,961		$	48,255		$	28,782

Supplemental disclosures:
Cash paid for (refunds of):
Interest	$	23		$	18		$	4
Income taxes, net	$	1,381		$	(6,211	)	$	3,844

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY

	Common Stock
(Dollars in thousands)	Shares Outstanding		Amount		Additional Paid-In Capital		Retained Earnings			Accumulated Other Comprehensive Income (Loss)			Total

Balances, October 31, 2008		6,420,851	$	642	$	51,690	$	71,889		$	(744	)	$	123,477

Net loss		—		—		—		(2,321	)		—			(2,321	)

Translation of foreign currency financial statements		—		—		—		—			2,716			2,716

Realized gains on derivative instruments reclassified into operations, net of tax of $(366)		—		—		—		—			(623	)		(623	)

Unrealized loss of derivative instruments, net of tax $(2,008)		—		—		—		—			(3,188	)		(3,188	)
Comprehensive loss														(3,416	)

Exercise of common stock options		20,000		2		41		—			—			43

Tax benefit from exercise of stock options		—		—		26		—			—			26

Stock-based compensation expense		—		—		246		—			—			246
Balances, October 31, 2009		6,440,851	$	644	$	52,003	$	69,568		$	(1,839	)	$	120,376

Net loss		—		—		—		(5,744	)		—			(5,744	)

Translation of foreign currency financial statements		—		—		—		—			(50	)		(50	)

Realized loss on derivative instruments reclassified into operations, net of tax of $11		—		—		—		—			19			19

Unrealized loss of derivative instruments,		—		—		—		—			(2	)		(2	)
Comprehensive loss														(5,777	)

Stock-based compensation expense		—		—		141		—			—			141
Balances, October 31, 2010		6,440,851	$	644	$	52,144	$	63,824		$	(1,872	)	$	114,740

Net income		—		—		—		11,124			—			11,124

Translation of foreign currency financial statements		—		—		—		—			363			363

Realized loss on derivative instruments reclassified into operations, net of tax of $3		—		—		—		—			7			7

Unrealized loss of derivative instruments, net of tax of $(283)		—		—		—		—			(492	)		(492	)
Comprehensive income														11,002

Stock-based compensation expense		—		—		470		—			—			470
Balances, October 31, 2011		6,440,851	$	644	$	52,614	$	74,948		$	(1,994	)	$	126,212

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1.	SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Consolidation. The consolidated financial statements include the accounts of Hurco Companies, Inc. (an Indiana corporation) and its wholly owned subsidiaries. We have a 35% ownership interest in a Taiwan affiliate that is accounted for using the equity method. Our investment in that affiliate was approximately $2.1 million as of October 31, 2011 and 2010, respectively. That investment is included in Investments and Other Assets, Net on the accompanying Consolidated Balance Sheets. Intercompany accounts and transactions have been eliminated.

Statements of Cash Flows. We consider all highly liquid investments with a stated maturity at the date of purchase of three months or less to be cash equivalents. Cash flows from purchases and sales of auction rate securities are classified as investing activities. Cash flows from hedges are classified consistent with the items being hedged.

Translation of Foreign Currencies. All balance sheet accounts of non-U.S. subsidiaries are translated at the exchange rate as of the end of the year and translation adjustments of foreign currency balance sheets are recorded as a component of Accumulated Other Comprehensive Loss in shareholders' equity. Income and expenses are translated at the average exchange rates during the year. Cumulative foreign currency translation adjustments as of October 31, 2011 were a net loss of $1,215,000 and are included in Accumulated Other Comprehensive Loss. Foreign currency transaction gains and losses are recorded as income or expense as incurred and are recorded in other (income) expense.

Hedging. We account for derivative instruments as either assets or liabilities and carry them at fair value. The accounting for changes in the fair value of a derivative depends on the intended use of the derivative and the resulting designation. For derivative instruments designated as a fair value hedge, the gain or loss is recognized in earnings in the period of change together with the offsetting loss or gain on the hedged item attributed to the risk being hedged. For a derivative instrument designated as a cash flow hedge, the effective portion of the derivative’s gain or loss is initially reported as a component of Accumulated Other Comprehensive Loss in shareholders’ equity and subsequently reclassified into earnings when the hedged exposure affects earnings. The ineffective portion of the gain or loss is reported in earnings immediately. For derivative instruments that are not designated as accounting hedges under the Derivatives and Hedging Topic of FASB guidance, changes in fair value are recognized in earnings in the period of change. The Company does not hold or issue derivative financial instruments for speculative trading purposes. We only enter into derivatives with one counterparty which is among one of the largest U.S. banks ranked by assets, in order to minimize its credit risk and to date, no such counterparty has failed to meet its financial obligations under such contracts. We are exposed to certain market risks relating to our ongoing business operations, including foreign currency risk, interest rate risk and credit risk. We manage our exposure to these and other market risks through regular operating and financing activities. Currently, the only risk that we manage through the use of derivative instruments is foreign currency risk.

We operate on a global basis and are exposed to the risk that our financial condition, results of operations and cash flows could be adversely affected by changes in foreign currency exchange rates. To reduce the potential effects of foreign exchange rate movements on our net equity investment in one of our foreign subsidiaries, gross profit and net earnings, we enter into derivative financial instruments in the form of foreign exchange forward contracts with a major financial institution. We are primarily exposed to foreign currency exchange rate risk with respect to transactions and net assets denominated in Euros, Pounds Sterling, Canadian Dollars, Indian Rupee, South African Rand, Singapore Dollars and New Taiwan Dollars.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

We account for derivative instruments designated as hedging instruments in accordance with FASB guidance related to accounting for derivative instruments and report all derivative instruments as assets or liabilities at fair value on our consolidated balance sheet.

Derivatives Designated as Hedging Instruments

We enter into foreign currency forward exchange contracts periodically to hedge certain forecasted inter-company sales and purchases denominated in foreign currencies (the Pound Sterling, Euro and New Taiwan Dollar). The purpose of these instruments is to mitigate the risk that the U.S. Dollar net cash inflows and outflows resulting from sales and purchases denominated in foreign currencies will be adversely affected by changes in exchange rates. These forward contracts have been designated as cash flow hedge instruments, and are recorded in the Consolidated Balance Sheets at fair value in Derivative Assets and Derivative Liabilities. The effective portion of the gains and losses resulting from the changes in the fair value of these hedge contracts are deferred in Accumulated Other Comprehensive Loss and recognized as an adjustment to Cost of Sales and Service in the period that the corresponding inventory sold that is the subject of the related hedge contract is recognized, thereby providing an offsetting economic impact against the corresponding change in the U.S. Dollar value of the inter-company sale or purchase being hedged. The ineffective portion of gains and losses resulting from the changes in the fair value of these hedge contracts is reported in Other (Income) Expense immediately. We perform quarterly assessments of hedge effectiveness by verifying and documenting the critical terms of the hedge instrument and determining that forecasted transactions have not changed significantly. We also assess on a quarterly basis whether there have been adverse developments regarding the risk of a counterparty default.

We had forward contracts outstanding as of October 31, 2011, in Euros, Pounds Sterling and New Taiwan Dollars with set maturity dates ranging from November 2011 through October 2012. The contract amount at forward rates in U.S. Dollars at October 31, 2011 for Euros and Pounds Sterling was $43.7 million and $10.5 million, respectively. The contract amount at forward rates in U.S. Dollars for New Taiwan Dollars was $26.1 million at October 31, 2011. At October 31, 2011, we had approximately $925,000 of losses, net of tax, related to cash flow hedges deferred in Accumulated Other Comprehensive Loss. Of this amount, $474,000 represents unrealized losses, net of tax, related to cash flow hedge instruments that remain subject to currency fluctuation risk. The majority of these deferred losses will be recorded as an adjustment to Cost of Sales and Service in periods through October 2012, in which the corresponding inventory that is the subject of the related hedge contract is sold, as described above.

We are exposed to foreign currency exchange risk related to our investment in net assets in foreign countries. To manage this risk, we entered into a forward contract with a notional amount of €3.0 million. We designated this forward contract as a hedge of our net investment in Euro denominated assets. We selected the forward method under the FASB guidance related to the accounting for derivatives instruments and hedging activities. The forward method requires all changes in the fair value of the forward to be reported as a cumulative translation adjustment in Accumulated Other Comprehensive Loss, net of tax, in the same manner as the underlying hedged net assets. This forward contract matured on November 23, 2010, and we entered into a new forward contract for the same notional amount that is set to mature in November 2011. As of October 31, 2011, we had a realized gain of $216,000 and an unrealized loss of $70,000, net of tax, recorded as cumulative translation adjustments in Accumulated Other Comprehensive Loss, related to these forward contracts.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Derivatives Not Designated as Hedging Instruments

We enter into foreign currency forward exchange contracts to protect against the effects of foreign currency fluctuations on receivables and payables denominated in foreign currencies. These derivative instruments are not designated as hedges under FASB guidance and, as a result, changes in their fair value are reported currently as Other (Income) Expense, Net in the Consolidated Statements of Operations consistent with the transaction gain or loss on the related receivables and payables denominated in foreign currencies.

We had forward contracts outstanding as of October 31, 2011, in Euros, Pounds Sterling, Canadian Dollars, South African Rand, Singapore Dollars and New Taiwan Dollars with set maturity dates ranging from November 2011 through April 2012. The contract amounts at forward rates in U.S. Dollars at October 31, 2011 for Euros, Pounds Sterling, Canadian Dollars, South African Rand and Singapore Dollars totaled $25.3 million. The contract amount at forward rates in U.S. Dollars for New Taiwan Dollars was $15.2 million at October 31, 2011.

Fair Value of Derivative Instruments

We recognize the fair value of derivative instruments as assets and liabilities on a gross basis on our Consolidated Balance Sheets. As of October 31, 2011 and October 31, 2010, all derivative instruments were recorded at fair value on the balance sheets as follows (in thousands):

	2011			2010
	Balance Sheet	Fair		Balance Sheet	Fair
Derivatives	Location	Value		Location	Value
Designated as Hedging Instruments:
Foreign exchange forward contracts	Derivative assets	$	634	Derivative assets	$	872
Foreign exchange forward contracts	Derivative liabilities	$	1,492	Derivative liabilities	$	1,778
Not Designated as Hedging Instruments:
Foreign exchange forward contracts	Derivative assets	$	563	Derivative assets	$	33
Foreign exchange forward contracts	Derivative liabilities	$	117	Derivative liabilities	$	345

Effect of Derivative Instruments on the Consolidated Balance Sheets, Statements of Changes in Shareholders’ Equity and Statements of Operations

Derivative instruments had the following effects on our Consolidated Balance Sheets, Statements of Changes in Shareholders’ Equity and Statements of Operations, net of tax during the year ended October 31, 2011 and 2010 (in thousands):

Derivatives	Amount of Gain (Loss) Recognized in Other Comprehensive Income						Location of Gain (Loss) Reclassified from Other Comprehensive Income	Amount of Gain (Loss) Reclassified from Other Comprehensive Income
	2011			2010				2011			2010

Designated as Hedging Instruments:
(Effective Portion)

Foreign exchange forward contracts – Intercompany sales/purchases	$	(775	)	$	(1	)	Cost of sales and service	$	(10	)	$	(30	)
Foreign exchange forward contract – Net Investment	$	(32	)	$	228

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

We recognized a loss of $3,000 during the year ended October 31, 2011 and a loss of $111,000 during the year ended October 31, 2010 as a result of contracts closed early that were deemed ineffective for financial reporting purposes and did not qualify as cash flow hedges.

Derivatives	Location of Gain (Loss) Recognized in Operations	Amount of Gain (Loss) Recognized in Operations (in thousands)
		2011			2010
Not Designated as Hedging Instruments:

Foreign exchange forward contracts	Other income (expense)	$	(368	)	$	539

Inventories. Inventories are stated at the lower of cost or market, with cost determined using the first-in, first-out method. Provisions are made to reduce excess or obsolete inventories to their estimated realizable value.

Property and Equipment. Property and equipment are carried at cost. Depreciation and amortization of assets are provided primarily under the straight-line method over the shorter of the estimated useful lives or the lease terms as follows:

		Number of Years
Land		Indefinite
Building		40
Machines		7 – 10
Shop and office equipment		3 – 7
Leasehold improvements		3 – 40

Total depreciation and amortization expense recognized for property and equipment for the years ended October 31, 2011, 2010 and 2009 was $2.1 million, $2.1 million, and $2.1 million, respectively.

Revenue Recognition. We recognize revenue from sales of our products upon delivery of the products to the customers, which is normally at the time of shipment, because persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. In certain foreign locations, we retain title after shipment under a “retention of title” clause solely to protect collectability. The retention of title is similar to UCC filings in the United States and provides the creditor with additional rights to the machine if the customer fails to pay. Revenue recognition at the time of shipment is appropriate in this instance as long as all risks of ownership have passed to the buyer. Our principal products are general-purpose computer controlled machine tools that are typically used in stand-alone operations. Transfer of ownership and risk of loss are not contingent upon customer acceptance. Prior to shipment, we test each machine to ensure the machine’s compliance with standard operating specifications as listed in our sales literature.

Depending upon geographic location, after shipment a machine may be installed at the customer’s facilities by a distributor, independent contractor or Hurco service technician. In most instances where a machine is sold through a distributor, we have no installation involvement. If sales are direct or through sales agents, we will typically complete the machine installation, which consists of the reassembly of certain parts that were removed for shipping and the re-testing of the machine to ensure that it is performing within the standard specifications. We consider the machine installation process inconsequential and perfunctory.

Service fees for maintenance contracts are deferred and recognized in earnings on a pro rata basis over the term of the contract.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Allowance for Doubtful Accounts. The allowance for doubtful accounts is based on our best estimate of probable credit issues and historical experience. We perform credit evaluations of the financial condition of our customers. No collateral is required for sales made on open account terms. Concentrations of credit risk with respect to accounts receivable are limited due to the large number of customers comprising our customer base. We consider trade accounts receivable to be past due when payment is not made by the due date as specified on the customer invoice, and charge off uncollectible balances when all collection efforts have been exhausted.

Software Revenue Recognition. Sales related to software products are recognized when shipped in conformity with FASB guidance related to software revenue recognition that requires at the time of shipment, persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. The software does not require production, modification or customization.

Product Warranty. Expected future product warranty claims are recorded to expense when the product is sold. Product warranty estimates are established using historical information about the nature, frequency, and average cost of warranty claims. Warranty claims are influenced by factors such as new product introductions, technological developments, the competitive environment, and the costs of component parts. Actual payments for warranty claims could differ from the amounts estimated requiring adjustments to the liabilities in future periods. See Note 11 of Notes to Consolidated Financial Statements for further discussion of warranties.

Research and Development Costs. The costs associated with research and development programs for new products and significant product improvements other than software development costs, which are eligible for capitalization per FASB guidance, are expensed as incurred and are included in Selling, General and Administrative Expenses. Research and development expenses totaled $2.5 million, $2.2 million, and $2.5 million, in fiscal 2011, 2010, and 2009, respectively.

Costs incurred to develop computer software products and significant enhancements to software features of existing products to be sold or otherwise marketed are capitalized, after technological feasibility is established. Software development costs are amortized on a straight-line basis over the estimated product life of the related software, which ranges from three to five years. We capitalized costs of $1.1 million in 2011, $1.2 million in 2010, and $2.0 million in 2009 related to software development projects. Amortization expense for software development costs was $2.2 million, $1.7 million, and $1.2 million, for the years ended October 31, 2011, 2010, and 2009, respectively. Accumulated amortization at October 31, 2011 and 2010 was $10.0 million and $7.8 million, respectively. Estimated amortization expense for the existing amortizable intangible assets for the years ending October 31, is as follows (in thousands):

Fiscal Year	Amortization Expense
2012	$	1,932
2013		1,008
2014		750
2015		353
2016		—

Impairment of Long-Lived Assets. The Company periodically evaluates the carrying value of long-lived assets to be held and used, including property and equipment and software development costs, when events or circumstances warrant such a review. The carrying value of a long-lived asset (or group of assets) to be held and used is considered impaired when the anticipated separately identifiable undiscounted cash flows from such an asset (or group of assets) are less than the carrying value of the asset (or group of assets) in accordance with FASB guidance related to accounting for the impairment or disposal of long-lived assets.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Earnings (Loss) Per Share. Basic earnings (loss) per share is calculated by dividing net income (loss) by the weighted-average number of common shares actually outstanding during the period. Diluted earnings (loss) per share assumes the issuance of additional shares of common stock upon exercise of all outstanding stock options and contingently issuable securities if the effect is dilutive, in accordance with the treasury stock method discussed in FASB issued guidance on “Earnings Per Share”. The following table presents a reconciliation of our basic and diluted earnings (loss) per share computation:

	Fiscal Year Ended
	October 31,
(in thousands, except per share amount)	2011						2010						2009
	Basic			Diluted			Basic			Diluted			Basic			Diluted

Net income (loss)	$	11,124		$	11,124		$	(5,744	)	$	(5,744	)	$	(2,321	)	$	(2,321	)

Undistributed earnings allocated to participating shares		(53	)		(53	)		—			—			—			—
Net income (loss) applicable to common shareholders	$	11,071		$	11,071		$	(5,744	)	$	(5,744	)	$	(2,321	)	$	(2,321	)
Weighted average shares outstanding		6,441			6,441			6,441			6,441			6,429			6,429
Stock options		—			31			—			—			—			—
		6,441			6,472			6,441			6,441			6,429			6,429
Income (loss) per share	$	1.72		$	1.71		$	(0.89	)	$	(0.89	)	$	(0.36	)	$	(0.36	)

Income Taxes. Deferred tax assets and liabilities are measured using enacted income tax rates in each jurisdiction in effect for the year in which the temporary differences are expected to be recovered or settled. These deferred tax assets are reduced by a valuation allowance, which is established when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Our judgment regarding the realization of deferred tax assets may change due to future profitability and market conditions, changes in U.S. or foreign tax laws and other factors. These changes, if any, may require material adjustments to these deferred tax assets and an accompanying reduction or increase in net income in the period when such determinations are made.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Estimates. The preparation of financial statements in conformity with U.S. Generally Accepted Accounting Principles requires us to make estimates and assumptions that affect the reported amounts presented and disclosed in our consolidated financial statements. Significant estimates and assumptions in these consolidated financial statements require the exercise of judgment and are used for, but not limited to, allowance for doubtful accounts, estimates of future cash flows and other assumptions associated with intangible and long-lived asset impairment tests, useful lives for depreciation and amortization, warranty programs, income taxes and deferred tax valuation allowances, lease classification, and contingencies. Due to the inherent uncertainty involved in making estimates, actual results reported in future periods may be different from these estimates.

Stock Based Compensation. We account for share-based compensation according to FASB guidance relating to share based payments, which requires the measurement and recognition of compensation expense for all share-based awards made to employees and directors based on estimated fair values on the grant date. This guidance requires that we estimate the fair value of share-based awards on the date of grant and recognize as expense the value of the portion of the award that is ultimately expected to vest over the requisite service period.

2.	BUSINESS OPERATIONS

Nature of Business. We design and manufacture computer control systems, software and computerized machine tools for sale through our own distribution system to the worldwide machine tool industry. The machine tool industry is highly cyclical and declines in demand can and will occur abruptly in the geographic markets we serve. As a result of the recent global recession, we experienced a significant decline in our sales and orders during fiscal 2009 and 2010 that adversely affected our results of operations. We reported substantial growth in sales during fiscal 2011, but have not yet returned to pre-recession levels.

The end market for our products consists primarily of precision tool, die and mold manufacturers, independent job shops, and specialized short-run production applications within large manufacturing operations. Industries served include: aerospace, defense, medical equipment, energy, automotive/transportation, electronics and computer industries. Our products are sold through independent agents and distributors throughout North America, Europe and Asia. We also have our own direct sales and service organizations in Canada, China, France, Germany, India, Italy, Poland, Singapore, South Africa, South Korea, the United Kingdom, and certain areas of the United States.

Credit Risk. We sell products to customers located throughout the world. We perform ongoing credit evaluations of customers and generally do not require collateral. Allowances are maintained for potential credit losses. Concentration of credit risk with respect to trade accounts receivable is limited due to the large number of customers and their dispersion across many geographic areas. Although a significant amount of trade receivables are with distributors primarily located in the United States, no single distributor or region represents a significant concentration of credit risk.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

Manufacturing Risk. Our wholly owned subsidiaries in Taiwan and China, Hurco Manufacturing Ltd. (HML) and Ningbo Hurco Manufacturing Limited (NHML), produce all of our machine tools. Any interruption in manufacturing at either of these locations would have an adverse effect on our financial operating results. Interruption in manufacturing at one of these locations could result from a change in the political environment or a natural disaster, such as an earthquake, typhoon, or tsunami. Any interruption with one of our key suppliers may also have an adverse effect on our operating results and our financial condition.

3.	INVENTORIES

Inventories as of October 31, 2011 and 2010 are summarized below (in thousands):

	2011		2010
Purchased parts and sub-assemblies	$	20,925	$	16,137
Work-in-process		15,440		13,157
Finished goods		44,762		26,572
	$	81,127	$	55,866

As of October 31, 2011, we had $3.9 million of finished goods inventory consigned to our distributors and agents throughout North America, Europe and Asia.

4.	DEBT AGREEMENTS

We are party to a domestic credit agreement that provides us with a $15.0 million revolving credit facility and maximum outstanding letters of credit of $3.0 million. Borrowings under this agreement may be used for general corporate purposes and bear interest at a floating rate, based either on LIBOR or the prime rate, plus an applicable margin. The agreement contains financial covenants, including restrictions on incurring additional debt, making acquisitions, or paying dividends if we report a cumulative net loss for four consecutive quarters. We also have an uncommitted credit facility in Taiwan in the amount of 100.0 million New Taiwan Dollars (approximately $3.3 million) in addition to a £1.0 million revolving credit facility in the United Kingdom and a €1.5 million revolving credit facility in Germany. The domestic and United Kingdom facilities mature on December 7, 2012. The credit facility in Germany does not have an expiration date.

On March 7, 2011 we entered into an uncommitted credit facility in China in the amount of 20.0 million Chinese Yuan (approximately $3.1 million) and amended our domestic credit agreement to accommodate the new facility. This facility expires on February 24, 2012 and we plan to extend it for another twelve months at that time.

All of our credit facilities are unsecured.

At October 31, 2011, we had $865,000 of borrowings outstanding under our credit facility in China, but had no other debt or borrowings under any of our other credit facilities. As of October 31, 2010, we had no debt or borrowings outstanding under any of our credit facilities and no outstanding letters of credit. At October 31, 2011, we were in compliance with all covenants contained in the related credit agreements and, as of that date, we had unutilized credit facilities of $24.3 million.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

5.	FINANCIAL INSTRUMENTS

The carrying amounts for trade receivables, payables and short-term debt approximate their fair values. We also have financial instruments in the form of foreign currency forward exchange contracts as described in Note 1 of Notes to Consolidated Financial Statements. The U.S. Dollar equivalent notional amount of these contracts was $126.4 million and $89.1 million at October 31, 2011 and 2010, respectively. The fair value of Derivative Assets recorded on our Consolidated Balance Sheets at October 31, 2011 and 2011 was $1.2 million and $905,000, respectively. The fair value of Derivative Liabilities recorded on our Consolidated Balance Sheets at October 31, 2011 and 2010 was $1.6 million and $2.1 million, respectively.

The future value of the foreign currency forward exchange contracts and the related currency positions are subject to offsetting market risk resulting from foreign currency exchange rate volatility. The counterparties to these contracts are substantial and creditworthy financial institutions. We do not consider either the risk of counterparty non-performance or the economic consequences of counterparty non-performance as material risks.

FASB fair value guidance established a three-tier fair value hierarchy, which categorizes the inputs used in measuring fair value. These tiers include: Level 1, defined as observable inputs, such as quoted prices in active markets; Level 2, defined as inputs other than quoted prices in active markets that are either directly or indirectly observable; and Level 3, defined as unobservable inputs in which little or no market data exist, therefore requiring an entity to develop its own assumptions.

In accordance with this guidance, the following table represents the fair value hierarchy for our financial assets and liabilities measured at fair value as of October 31, 2011 (in thousands):

	Assets				Liabilities
	October 31,		October 31,		October 31,		October 31,
	2011		2010		2011		2010
Level 1
Deferred compensation	$	741	$	674	$	-	$	-

Level 2
Derivatives	$	1,197	$	905	$	1,609	$	2,123

Included in Level 1 assets are mutual fund investments under a nonqualified deferred compensation plan. We estimate the fair value of these investments on a recurring basis using market prices which are readily available. Included as Level 2 fair value measurements are derivative assets and liabilities related to gains and losses on foreign currency forward exchange contracts entered into with a third party. We estimate the fair value of these derivatives on a recurring basis using foreign currency exchange rates obtained from active markets.

During fiscal 2011, we did not have any significant non-recurring measurements of nonfinancial assets and nonfinancial liabilities.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

6.	INCOME TAXES

In the fiscal years set forth below, the provision (benefit) for income taxes consisted of the following:

(in thousands)	Year Ended October 31,
	2011			2010			2009

Current:
U.S. taxes	$	3,272		$	(4,410	)	$	(5,512	)
Foreign taxes		2,595			1,079			1,197
		5,867			(3,331	)		(4,315	)
Deferred:
U.S. taxes		(1,452	)		189			2,954
Foreign taxes		80			27			(130	)
		(1,372	)		216			2,824
	$	4,495		$	(3,115	)	$	(1,491	)

A comparison of income tax expense at the U.S. statutory rate of 35% in 2011, 2010 and 2009, to the Company’s effective tax rate is as follows:

Income (Loss) before income taxes (in thousands):	Year Ended October 31,
	2011			2010			2009
Domestic	$	6,098		$	(12,504	)	$	(7,098	)
Foreign		9,521			3,645			3,286
Earnings (Loss) before taxes on income	$	15,619		$	(8,859	)	$	(3,812	)
Tax rates:
U.S. statutory rate		35.0	%		35.0	%		35.0	%
Effect of tax rate of international jurisdictions different than U.S. statutory rates		(4.9	)%		2.6	%		4.4	%
Valuation allowance		(0.9	)%		(9.5	)%		(2.2	)%
State taxes		0.9	%		3.3	%		4.7	%
Uncertain tax position statute expiration		—			5.6	%		3.4	%
Other		(1.3	)%		(1.8	)%		(6.2	)%
Effective tax rate		28.8	%		35.2	%		39.1	%

We have not provided any U.S. income taxes on the undistributed earnings of our foreign subsidiaries or equity method investments based upon our determination that such earnings will be indefinitely reinvested. Undistributed earnings of foreign investments and subsidiaries at October 31, 2011 are approximately $43.8 million. In the event these earnings are later distributed to the U.S., such distributions would likely result in additional U.S. tax that may be offset, at least in part by associated foreign tax credits.

Deferred income taxes are determined based on the difference between the amounts used for financial reporting purposes and tax basis of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to reverse. Deferred taxes are adjusted for changes in tax rates and tax laws when changes are enacted. Valuation allowances are recorded to reduce deferred tax assets when it is more likely than not that a tax benefit will not be realized.

As of October 31, 2011, we have deferred tax assets established for accumulated net operating loss carryforwards of $750,000, primarily related to state and foreign jurisdictions. The Company has established a valuation allowance against some of these carryforwards due to the uncertainty of their full realization. As of October 31, 2011 and 2010, the balance of this valuation allowance was $487,000 and $961,000, respectively.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Significant components of our deferred tax assets and liabilities at October 31, 2011 and 2010 were as follows (in thousands):

	October 31,
	2011			2010
Deferred Tax Assets:

Net derivative instruments	$	448		$	162
Accrued inventory reserves		761			801
Accrued warranty expenses		205			212
Deferred compensation		265			256
Other accrued expenses		879			756
Net operating loss and credit carryforwards		750			1,401
Other		196			267
		3,504			3,855
Less: Valuation allowance on net operating loss carryforwards		(487	)		(961	)
Deferred tax assets		3,017			2,894

Deferred Tax Liabilities:
Property and equipment and capitalized software development costs		(2,298	)		(2,762	)
Other		(9	)		—

Net deferred tax assets	$	710		$	132

As of October 31, 2011, we had deferred tax assets relating to net operating losses and other carryforwards for international and U.S. income tax purposes of $750,000, of which $159,000 will expire within 5 years; $546,000 will expire between 5 and 20 years; and $45,000 will never expire.

A reconciliation of the beginning and ending amount of unrecognized tax benefits, excluding the related accrual for interest or penalties, is as follows (in thousands):

	2011		2010			2009
Balance, beginning of year	$	178	$	574		$	613
Additions based on tax positions related to the current year		66		1			66
Reductions due to statute expiration		—		(397	)		(105	)

Balance, end of year	$	244	$	178		$	574

The entire balance of the unrecognized tax benefits and related interest at October 31, 2011, if recognized, would favorably affect the effective tax rate in future periods.

We recognize accrued interest and penalties related to unrecognized tax benefits as components of our income tax provision. We believe there is substantial support for taking these tax benefits and therefore have estimated no tax penalties. As of October 31, 2011, the gross amount of interest accrued, reported in other liabilities, was approximately $31,000, which did not include the federal tax benefit of interest deductions.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

The statute of limitations with respect to unrecognized tax benefits will expire between July 2014 and July 2015.

Due to the uncertain and complex application of tax regulations, it is possible that the ultimate resolution of future audits may result in liabilities that could be different from this estimate. In such case, we will record additional tax expense or tax benefit in the tax provision (benefit) or reclassify amounts on the consolidated balance sheets in the period in which such the matter is effectively settled with the taxing authority.

We file income tax returns in the U.S. federal jurisdiction and various states, local, and non-U.S. jurisdictions. The German taxing authority completed its examination of the fiscal years 2005 to 2008 of our German subsidiary in the second quarter of fiscal 2011 with no significant adjustments for the periods subject to their audit. We were also notified by the U.S. taxing authority that they intend to audit the tax return for fiscal 2010.

We or one of our subsidiaries files U.S. federal and/or state income tax returns as well as tax returns in one or more foreign jurisdictions. A summary of open tax years by major jurisdiction is presented below:

United States federal	Fiscal 2006 through the current period
Indiana	Fiscal 2007 through the current period
California	Fiscal 2007 through the current period
Germany¹	Fiscal 2008 through the current period
Taiwan	Fiscal 2006 through the current period

¹ Includes federal as well as state, provincial or similar local jurisdictions, as applicable.

7.	EMPLOYEE BENEFITS

We have defined contribution plans that include a majority of our employees, under which our matching contributions are primarily discretionary. The purpose of these plans is generally to provide additional financial security during retirement by providing employees with an incentive to save throughout their employment. Our contributions totaled $274,000, $144,000, and $443,800, for the fiscal years ended October 31, 2011, 2010 and 2009, respectively.

8.	STOCK-BASED COMPENSATION

In March 2008, we adopted the Hurco Companies, Inc. 2008 Equity Incentive Plan (the “2008 Plan”), which allows us to grant awards of stock options, Stock Appreciation Rights settled in stock (SARs), restricted shares, performance shares and performance units. The 2008 Plan replaced the 1997 Stock Option and Incentive Plan (the “1997 Plan”) which expired in March 2007. The Compensation Committee of the Board of Directors has authority to determine the officers, directors and key employees who will be granted awards; designate the number of shares subject to each award; determine the terms and conditions upon which awards will be granted; and prescribe the form and terms of award agreements. We have granted stock options under both plans which are currently outstanding, and restricted stock awards under the 2008 Plan. No stock option may be exercised more than ten years after the date of grant or such shorter period as the Compensation Committee may determine at the date of grant. The total number of shares of our common stock that may be issued as awards under the 2008 Plan is 750,000. The market value of a share of our common stock, for purposes of the 2008 Plan, is the closing sale price as reported by the Nasdaq Global Select Market on the date in question or, if not a trading day, on the last preceding trading date.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

During fiscal 2011, 2010 and 2009, we recorded approximately $470,000, $141,000 and $246,000, respectively, of stock-based compensation expense related to grants under the plans. As of October 31, 2011, there was approximately $750,000 of total unrecognized stock-based compensation cost that we expect to recognize by the end of fiscal 2014.

On March 17, 2011, the Compensation Committee granted a total of 5,859 shares of restricted stock under the 2008 Plan to our board of directors. The restricted stock vests one year from the date of grant provided the recipient remains on the board of directors through that date. The grant date fair value of the restricted stock is based on the closing sales price of our common stock on the grant date which was $29.86 per share.

On December 22, 2010, the Compensation Committee granted a total of 25,000 shares of restricted stock under the 2008 Plan to our executive officers. The restricted stock vests in full three years from the date of grant provided the recipient remains employed by us through that date. The grant date fair value of the restricted stock is based on the closing sales price of our common stock on the grant date which was $23.10 per share.

On May 13, 2010, the Compensation Committee granted a total of 20,000 stock options under the 2008 Plan to four executive employees. The fair value of the options was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock of 63%, expected term of the options, dividend yield rate of 0% and a risk-free interest rate of 2.3% based upon the five-year U.S. Treasury yield as of the date of grant. The options vest over a three-year period beginning one year from the date of grant. Based upon the foregoing factors, the grant date fair value of the stock options was determined to be $9.90 per share.

On December 18, 2009, the Compensation Committee granted a total of 30,000 stock options under the 2008 Plan to four executive employees. The fair value of the options was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock of 65%, expected term of the options, dividend yield rate of 0% and a risk-free interest rate of 2.3% based upon the five-year U.S. Treasury yield as of the date of grant. The options vest over a three-year period beginning one year from the date of grant. Based upon the foregoing factors, the grant date fair value of the stock options was determined to be $8.29 per share.

During fiscal 2009, options to purchase 20,000 shares were exercised, resulting in cash proceeds of approximately $43,000 and an additional tax benefit of approximately $26,000.

On April 16, 2009, the Compensation Committee granted a total of 21,000 options under the 2008 Plan to three new employees. The fair value of the options was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock of 69%, the expected term of the options, dividend yield rate of 0% and a risk-free interest rate based upon the five-year U.S. Treasury yield as of the date of grant of 1.8%. The options granted to the employees vest over a five-year period beginning one year from the date of grant. Based upon the foregoing factors, the grant date fair value of the options was determined to be $8.62 per share.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

A reconciliation of the Company’s restricted stock activity and related information is as follows:

	Number of Shares		Weighted Average Grant Date Fair Value
Unvested at October 31, 2010		—	$	—
Shares granted		30,859		24.38
Shares vested		—		—
Shares cancelled		—		—
Unvested at October 31, 2011		30,859	$	24.38

A summary of the status of the options as of October 31, 2011, 2010 and 2009 and the related activity for the year is as follows:

	Shares Under Option			Weighted Average Exercise Price Per Share
Balance October 31, 2008		64,369		$	20.29
Granted		21,000			14.88
Cancelled		—			—
Expired		—			—
Exercised		(20,000	)		2.15

Balance October 31, 2009		65,369		$	24.11
Granted		50,000			16.14
Cancelled		—			—
Expired		—			—
Exercised		—			—

Balance October 31, 2010		115,369		$	20.66
Granted		—			—
Cancelled		—			—
Expired		—			—
Exercised		—			—

Balance October 31, 2011		115,369		$	20.66

The total intrinsic value of stock options exercised during the twelve months ended October 31, 2011, 2010 and 2009 was approximately $0, $0 and $275,000, respectively.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

As of October 31, 2011, the total intrinsic value of outstanding stock options already vested and expected to vest and the intrinsic value of options that are outstanding and exercisable as of October 31, 2011 was $747,000. Stock options outstanding and exercisable on October 31, 2011, are as follows:

Range of Exercise Prices Per Share		Shares Under Option		Weighted Average Exercise Price Per Share		Weighted Average Remaining Contractual Life in Years
Outstanding
$	2.15		500	$	2.15		0.1
	14.82		30,000		14.82		8.1
	14.88		21,000		14.88		7.5
	18.13		20,000		18.13		8.5
	26.69		33,869		26.69		5.0
	35.83		10,000		35.83		6.6
$	2.15 – 35.83		115,369	$	20.66		7.0
Exercisable
$	2.15		500	$	2.15		0.1
	14.82		10,000		14.82		2.7
	14.88		7,000		14.88		2.5
	18.13		6,667		18.13		2.8
	26.69		33,869		26.69		5.0
	35.83		10,000		35.83		6.6
$	2.15 – 35.83		68,036	$	24.05		4.4

9. RELATED PARTY TRANSACTIONS

As of October 31, 2011, we owned approximately 35% of the outstanding shares of a Taiwanese-based contract manufacturer, Hurco Automation, Ltd. (HAL). HAL’s scope of activities includes the design, manufacture, sales and distribution of industrial automation products, software systems and related components, including control systems and components produced under contract for sale exclusively to us. We are accounting for this investment using the equity method. The investment of $2.1 million at October 31, 2011 and 2010 is included in Investments and Other Assets, Net on the Consolidated Balance Sheets. Purchases of product from HAL amounted to $9.1 million, $5.8 million and $2.9 million in 2011, 2010 and 2009, respectively. Sales of product to HAL were $1.9 million, $1.2 million and $322,000 for the years ended October 31, 2011, 2010 and 2009, respectively. Trade payables to HAL were $2.7 million and $1.7 million at October 31, 2011 and 2010, respectively. Trade receivables from HAL were $373,000 and $381,000 at October 31, 2011 and 2010, respectively.

Summary unaudited financial information for HAL’s operations and financial conditions is as follows:

(in thousands)	2011			2010			2009
Net Sales	$	10,938		$	7,057		$	3,710
Gross Profit		1,284			816			488
Operating Income (Loss)		(97	)		(399	)		(689	)
Net Income (Loss)		202			(337	)		(1,203	)

Current Assets	$	8,201		$	7,439		$	6,110
Non-current Assets		2,133			1,846			1,742
Current Liabilities		3,298			2,529			1,211

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

10. CONTINGENCIES AND LITIGATION

11. GUARANTEES AND PRODUCT WARRANTIES

We follow FASB guidance for accounting for contingencies relating to the guarantor’s accounting for, and disclosures of, the issuance of certain types of guarantees.

From time to time, our subsidiaries guarantee third party payment obligations in connection with the sale of machines to customers that use financing. We follow FASB guidance for accounting for contingencies with respect to these guarantees. As of October 31, 2011, we had 23 outstanding third party payment guarantees totaling approximately $1.2 million. The terms of these guarantees are consistent with the underlying customer financing terms. Upon shipment of a machine, the customer has the risk of ownership. The customer does not obtain title, however, until it has paid for the machine. A retention of title clause allows us to recover the machine if the customer defaults on the financing. We accrue for potential liabilities under these guarantees when we believe a loss is probable and can be estimated.

	2011			2010			2009
Balance, beginning of year	$	1,591		$	1,286		$	2,536
Provision for warranties during the year		3,142			2,170			799
Charges to the accrual		(2,993	)		(1,875	)		(2,096	)
Impact of foreign currency translation		(15	)		10			47
Balance, end of year	$	1,725		$	1,591		$	1,286

The factor primarily responsible for the increase in the warranty accrual and provision from fiscal 2009 to fiscal 2011 is the increase in sales. In addition, during fiscal 2010 we introduced several new products and our product mix included a greater percentage of our higher-performance machines, which due to their complexity tend to have both a higher rate of warranty claim and a higher cost per claim. These factors, coupled with our increased production activity within a relatively short period of time, were considered when increasing the accrual and provision during fiscal 2010 and 2011.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

12. OPERATING LEASES

We lease facilities, certain equipment and vehicles under operating leases that expire at various dates through 2017. Future payments required under operating leases as of October 31, 2011, are summarized as follows (in thousands):

2012	$	2,769
2013		2,228
2014		933
2015		199
2016 and thereafter		245
Total	$	6,374

Lease expense for the years ended October 31, 2011, 2010, and 2009 was $3.0 million, $2.7 million, and $3.0 million, respectively.

We recorded approximately $152,000 of lease income during fiscal 2011 from leasing 50,000 square feet of our Indianapolis facility. The lease expires on October 31, 2012 and sublease income will be comparable.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

13. QUARTERLY HIGHLIGHTS (Unaudited)

	First Quarter			Second Quarter			Third Quarter			Fourth Quarter
2011 (In thousands, except per share data)

Sales and service fees	$	39,680		$	41,576		$	50,573		$	48,571
Gross profit		11,691			12,651			15,850			15,682
Gross profit margin		29.5	%		30.4	%		31.3	%		32.3	%
Selling, general and administrative expenses		8,830			9,254			9,317			11,092
Operating income (loss)		2,861			3,397			6,533			4,590
Provision (benefit) for income taxes		899			1,050			1,706			840
Net income (loss)		1,546			2,349			4,575			2,654
Income (loss) per common share – basic	$	0.24		$	0.36		$	0.71		$	0.41
Income (loss) per common share – diluted	$	0.24		$	0.36		$	0.70		$	0.41

	First Quarter			Second Quarter			Third Quarter			Fourth Quarter
2010 (In thousands, except per share data)
Sales and service fees	$	20,616		$	24,088		$	26,474		$	34,715
Gross profit		3,980			4,677			4,659			8,480
Gross profit margin		19.3	%		19.4	%		17.6	%		24.4	%
Selling, general and administrative expenses		6,533			7,230			6,994			9,080
Operating income (loss)		(2,553	)		(2,553	)		(2,335	)		(600	)
Provision (benefit) for income taxes		(983	)		(1,096	)		(1,210	)		174
Net income (loss)		(1,836	)		(1,573	)		(1,173	)		(1,162	)
Income (loss) per common share – basic	$	(0.29	)	$	(0.24	)	$	(0.18	)	$	(0.18	)
Income (loss) per common share – diluted	$	(0.29	)	$	(0.24	)	$	(0.18	)	$	(0.18	)

14. SEGMENT INFORMATION

We operate in a single segment: industrial automation equipment. We design and produce interactive computer control systems and software and computerized machine tools for sale through our own distribution network to the worldwide metal working market. We also provide software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training support.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

We sell our products through more than 100 independent agents and distributors throughout North America, Europe and Asia. Our line is the primary line for the majority of our distributors globally even though some may carry competitive products. We also have our own direct sales and service organizations in Canada, China, France, Germany, India, Italy, Poland, Singapore, South Africa, South Korea, the United Kingdom, and certain areas of the United States, which are among the world's principal machine tool consuming countries. During fiscal 2011, no distributor accounted for more than 5% of our sales and service fees. In fiscal 2011, more than 70% of our revenues were from overseas customers and no single end-user of our products accounted for more than 5% of our total sales and service fees.

The following table sets forth the contribution of each of our product groups to our total sales and service fees during each of the past three fiscal years (in thousands):

Net Sales and Service Fees by Product Category		Year ended October 31,
		2011		2010		2009

	Computerized Machine Tools	$	156,736	$	88,184	$	75,213
	Computer Control Systems and Software *		3,322		2,347		2,546
	Service Parts		14,836		10,798		8,851
	Service Fees		5,506		4,564		4,406
	Total	$	180,400	$	105,893	$	91,016

*Amounts shown do not include computer control systems and software sold as an integrated component of computerized machine systems.

The following table sets forth revenues by geographic area, based on customer location, for each of the past three fiscal years (in thousands):

Revenues by Geographic Area	Year Ended October 31,
	2011		2010		2009

North America	$	47,599	$	26,079	$	25,203

Germany		47,162		25,887		26,273
United Kingdom		22,463		13,703		11,242
Italy		5,192		5,863		4,969
France		10,227		6,061		4,486
Other Europe		23,205		12,185		11,372
Total Europe		108,249		63,699		58,342

Asia		21,552		13,697		5,557
Other Foreign		3,000		2,418		1,914
Total Foreign		132,801		79,814		65,813
	$	180,400	$	105,893	$	91,016

Long-lived tangible assets, net by geographic area were (in thousands):

	As of October 31,
	2011		2010
United States	$	6,773	$	6,998
Foreign countries		6,375		6,277
	$	13,148	$	13,275

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Net assets by geographic area were (in thousands):

	As of October 31,
	2011		2010
North America	$	60,235	$	55,961
Europe		45,613		41,737
Asia		20,364		17,042
	$	126,212	$	114,740

15. NEW ACCOUNTING PRONOUNCEMENTS

In June 2011, the FASB amended Accounting Standards Update (ASU) 2011-05, Comprehensive Income, Presentation of Comprehensive Income, which will require companies to present the components of net income and other comprehensive income either as one continuous statement or as two consecutive statements. It eliminates the option to present components of other comprehensive income as part of the statement of changes in shareholders’ equity. The guidance in ASU 2011-05 does not change the items which must be reported in other comprehensive income, how such items are measured, or when they must be reclassified to net income. The guidance in ASU 2011-05 is effective for interim and annual periods beginning after December 15, 2011, and should be applied retrospectively. Since the provisions of ASU 2011-05 are presentation related only, we do not expect the adoption of ASU 2011-05 to have a material effect on our consolidated financial statements.

In December 2011, The FASB issued Accounting Standards Update 2011-12 (ASU 2011-12), Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of Items Out of Accumulated Other Comprehensive Income in ASU 2011-05. ASU 2011-12 defers the requirement that companies present reclassification adjustments for each component of AOCI in both net income and OCI on the face of the financial statements. The effective dates for ASU 2011-12 are consistent with the effective dates for ASU 2011-05 and, similar to our expectations for the adoption of ASU 2011-05, we do not expect that the adoption of this guidance will have a material effect on our consolidated financial statements.

Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

Item 9A. CONTROLS AND PROCEDURES

Under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures as of October 31, 2011, pursuant to Rule 13a-15(b) under the Securities Exchange Act of 1934, as amended. Based upon that evaluation, our management, including the Chief Executive Officer and Chief Financial Officer, concluded that our disclosure controls and procedures were effective as of the evaluation date.

There have been no changes in our internal controls over financial reporting that occurred during the fourth quarter of the fiscal year ended October 31, 2011 that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Item 9B. OTHER INFORMATION

During the fourth quarter of fiscal 2011, the Audit Committee of the Board of Directors did not engage our independent registered public accounting firm to perform any new non-audit services. This disclosure is made pursuant to Section 10A(i)(2) of the Securities Exchange Act of 1934, as added by Section 202 of the Sarbanes-Oxley Act of 2002.

The following graph illustrates the cumulative total shareholder return on our common stock for the five-year period ended October 31, 2011, as compared to the Russell 2000 and a peer group consisting of traded securities for U.S. companies in the same three digit Standard Industrial Classification group as Hurco (SIC 3540-3549 – Metal Working Machinery and Equipment). The comparisons in this table are required by the SEC and are not intended to forecast or be indicative of possible future performance of our common stock.

	10/06	10/07	10/08	10/09	10/10	10/11

Hurco Companies, Inc.	100.00	219.11	86.34	61.01	70.61	100.23
Russell 2000	100.00	109.27	71.94	76.59	96.95	103.45
Peer Group - SIC Codes 3540-3549	100.00	140.96	71.25	89.60	123.01	129.03

PART III

Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2012 annual meeting of shareholders except that the information required by Item 10 regarding our executive officers is included herein under a separate caption at the end of Part I.

Item 11. EXECUTIVE COMPENSATION

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2012 annual meeting of shareholders.

Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Except for the information concerning equity compensation plans, the information required by this item is incorporated herein by reference to the definitive proxy statement for our 2012 annual meeting of shareholders.

Equity Compensation Plan Information

The following table gives information about our common stock that may be issued upon the exercise of options, warrants and rights under all of our existing equity compensation plans as of October 31, 2011:

Plan Category	Number of securities to be issued upon exercise of outstanding options, restricted shares, warrants and rights (a) (#)		Weighted- average exercise price (b) ($)		Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a)) (c) (#)
Equity compensation plans approved by security holders		146,228	$	21.44		638,141

Equity compensation plans not approved by security holders		—		—		—

Total		146,228	$	21.44		638,141

As of October 31, 2011, all outstanding stock-based awards had been granted pursuant to plans approved by our shareholders.

Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2012 annual meeting of shareholders.

Item 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2012 annual meeting of shareholders.

PART IV

Item 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a)	1.	Financial Statements. The following consolidated financial statements of Registrant are included herein under Item 8 of Part II:
			Page
		Report of Independent Registered Public Accounting Firm	27

		Consolidated Statements of Operations – years ended October 31, 2011, 2010 and 2009	29
		Consolidated Balance Sheets – as of October 31, 2011 and 2010	30
		Consolidated Statements of Cash Flows – years ended October 31, 2011, 2010 and 2009	31
		Consolidated Statements of Changes in Shareholders’ Equity – years ended October 31, 2011, 2010 and 2009	32
		Notes to Consolidated Financial Statements	33

	2.	Financial Statement Schedule. The following financial statement schedule is included in this Item.
			Page
		Schedule II - Valuation and Qualifying Accounts and Reserves	56

	All other financial statement schedules are omitted because they are not applicable or the required information is included in the consolidated financial statements or notes thereto.

(b)	Exhibits

	Exhibits being filed with this Form 10-K or incorporated herein by reference are listed on page 57.

Schedule II - Valuation and Qualifying Accounts and Reserves

for the years ended October 31, 2011, 2010, and 2009

(Dollars in thousands)

Description	Balance at Beginning of Period		Charged to Costs and Expenses			Charged to Other Accounts		Deductions			Balance at End of Period
Allowance for doubtful accounts for the year ended:

October 31, 2011	$	497	$	315			—	$	204	(1)	$	608

October 31, 2010	$	809	$	(301	)		—	$	11	(2)	$	497

October 31, 2009	$	678	$	736			—	$	605	(3)	$	809

Accrued warranty expenses for the year ended:

October 31, 2011	$	1,591	$	3,127			—	$	2,993		$	1,725

October 31, 2010	$	1,286	$	2,180			—	$	1,875		$	1,591

October 31, 2009	$	2,536	$	846			—	$	2,096		$	1,286

(1) Receivable write-offs of $204,000.

2) Receivable write-offs of $13,000, net of cash recoveries on accounts previously written off of $2,000.

(3) Receivable write-offs of $605,000.

EXHIBITS INDEX

Exhibits Filed. The following exhibits are filed with this report:

10.1*	Summary compensation sheet.
21	Subsidiaries of the Registrant.
23	Consent of Independent Registered Public Accounting Firm, Ernst & Young LLP
31.1	Certification by the Chief Executive Officer, pursuant to Rule 13a-15(b) under the Securities and Exchange Act of 1934, as amended.
31.2	Certification by the Chief Financial Officer, pursuant to Rule 13a-15(b) under the Securities and Exchange Act of 1934, as amended.
32.1	Certification by the Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2	Certification by the Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

Exhibits Incorporated by Reference. The following exhibits are incorporated into this report:

3.1	Amended and Restated Articles of Incorporation of the Registrant, incorporated by reference to Exhibit 3.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended July 31, 2000.
3.2	Amended and Restated By-Laws of the Registrant as amended through July 8, 2009, incorporated by reference to Exhibit 3.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended July 31, 2009.
10.2	Credit Agreement dated as of December 7, 2007, between Hurco Companies, Inc. and JP Morgan Chase Bank, N.A., incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed December 12, 2007.
10.3	First Amendment to Credit Agreement dated as of October 30, 2009, between Hurco Companies, Inc. and JP Morgan Chase Bank, N.A., incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed November 4, 2009.
10.4	Second Amendment to Credit Agreement dted as of March 1, 2011, between Hurco Companies, Inc. and JPMorgan Chase Bank, N.A., incorporated by reference to Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended April 30, 2011.
10.5*	Employment Agreement between the Registrant and John G. Oblazney dated January 12, 2007, incorporated by reference to Exhibit 10.1 to the Registrant’s Annual Report on Form 10-K for the year ended October 31, 2006.
10.6*	Employment Agreement between the Registrant and Michael Doar dated November 13, 2001, incorporated by reference as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended January 31, 2002.
10.7*	Amended 1997 Stock Option and Incentive Plan, incorporated by reference as Exhibit 10 to the Registrant’s Quarterly Report on Form 10-Q filed for the quarter ended July 31, 2005.
10.8	Hurco Companies, Inc. 2008 Equity Incentive Plan, incorporated by reference to Appendix A of the Registrant’s definitive Proxy Statement on Schedule 14A filed January 28, 2008.
10.9*	Form of restated split-dollar insurance agreement, incorporated by reference to Exhibit 10.2 to the Registrant’s Annual Report on Form 10-K for the year ended October 31, 2008.
10.10*	Form of Restricted Stock Award Agreement – Employee, incorporated by reference to Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended January 31, 2011.
10.11	Form of Restricted Stock Award Agreement – Director, incorporated by reference to Exhibit 10.2 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended January 31, 2011.

*	The indicated exhibit is a management contract, compensatory plan or arrangement required to be listed by Item 601 of Regulation S-K.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized, this 13th day of January, 2012.

HURCO COMPANIES, INC.

By:	/s/ John G. Oblazney
	John G. Oblazney
	Vice-President, Secretary,
	Treasurer and
	Chief Financial Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:

Signature and Title(s)		Date

/s/ Michael Doar		January 13, 2012
Michael Doar, Chairman of the Board,
Chief Executive Officer and President
of Hurco Companies, Inc.
(Principal Executive Officer)

/s/ John G. Oblazney		January 13, 2012
John G. Oblazney
Vice-President,
Secretary, Treasurer and
Chief Financial Officer
of Hurco Companies, Inc.
(Principal Financial Officer)

/s/ Sonja K. McClelland		January 13, 2012
Sonja K. McClelland
Corporate Controller, Assistant Secretary
of Hurco Companies, Inc.
(Principal Accounting Officer)

/s/ Stephen H. Cooper		January 13, 2012
Stephen H. Cooper, Director

/s/ Robert W. Cruickshank		January 13, 2012
Robert W. Cruickshank, Director

/s/ Philip James		January 13, 2012
Philip James, Director

/s/ Michael P. Mazza		January 13, 2012
Michael P. Mazza, Director

/s/ Richard T. Niner		January 13, 2012
Richard T. Niner, Director

/s/ Charlie Rentschler		January 13, 2012
Charlie Rentschler, Director

/s/ Janaki Sivanesan		January 13, 2012
Janaki Sivanesan, Director

Exhibit 10.1

SUMMARY COMPENSATION SHEET

January 1, 2012

Compensation of Non-Employee Directors

Annual Retainer. Non-employee members of the Board of Directors of Hurco Companies, Inc. (the “Company”) receive a cash retainer of $5,000 per fiscal quarter and restricted shares equivalent in value to $25,000 which vest one year from the date of grant.

Committee Retainers. Committee chairs and audit committee members also receive the following cash payments:

Audit Committee Chair - $2,500 per fiscal quarter.

Compensation Committee Chair - $1,250 per fiscal quarter.

Audit Committee Members - $1,250 per fiscal quarter

Reimbursement. The Company reimburses non-employee directors for travel and other expenses incurred to attend Board and committee meetings.

Compensation of Named Executive Officers

Base Salaries. The executive officers of the Company serve at the discretion of the Board of Directors. The Compensation Committee of the Board sets or ratifies the annual base salaries of the Company’s executive officers. The following are the annual base salary levels as of January 1, 2012 for the Company’s current Chief Executive Officer, Chief Financial Officer and its three other most highly compensated executive officers (the “Named Executive Officers”) as of January 1, 2012 identified in the proxy statement for the Company’s 2012 annual meeting of shareholders:

Michael Doar Chairman, Chief Executive Officer and President	$	400,000
John G. Oblazney Vice President, Secretary, Treasurer and Chief Financial Officer	$	200,000
John P. Donlon Executive Vice President, Worldwide Sales and Service	$	210,000
Sonja K. McClelland Corporate Controller and Assistant Secretary	$	160,000
Gregory S. Volovic Executive Vice President of Technology and Operations	$	240,000

Employment Agreements. The Company has entered into employment agreements with the Chief Executive Officer and the Chief Financial Officer. These contracts generally provide for salary payments and other benefits for twelve months if the officer’s employment terminates for a qualifying event or circumstance other than gross misconduct. The employment agreements are filed as exhibits to the Company’s Annual Report on Form 10-K for the fiscal year ended October 31, 2011.

Bonuses. Each of the Named Executive Officers may be eligible to receive a discretionary bonus set or ratified by the Compensation Committee.

Equity-Based Awards. The only incentive plan in which the named executive officers are eligible to participate is the 2008 Plan, which was approved by shareholders in March 2008. The plan provides for equity-based incentive awards in the form of stock options, stock appreciation rights settled in stock, restricted shares, performance shares and performance units. Under the plan, the Compensation Committee has authority to determine the officers, directors and key employees who will be granted awards; determine the form and size of the award; determine the terms and conditions upon which the awards will be granted; and prescribe the form and terms of award agreements.

Deferred Compensation Plan. The Company maintains a nonqualified deferred compensation plan in which senior managers and other highly compensated employees are eligible to participate. Eligible participants of the plan are able to defer between 2% and 50% of base salary and up to 100% of long-term annual bonus less required and voluntary payroll deductions in a given plan year. The Board of Directors may declare a discretionary amount of matching credits for participants deferring compensation, up to a maximum of 6% of compensation. Participants are 100% vested in all deferral and matching accounts at all times. Amounts deferred under the plan are credited with earnings at the rate of return generated by mutual fund investment options elected by the participants that are offered in the Company’s 401(k) plan.

Medical, Disability and Life Insurance. The Named Executive Officers participate in benefits coverage to help manage the financial impact of ill health, disability and death. All Named Executive Officers are provided a supplemental disability benefit and the Chief Executive Officer is provided a split-dollar life insurance benefit.

Retirement Benefits. The Company sponsors a 401(k) plan in which full-time employees are eligible to participate. The purpose of the plan is to provide an incentive for employees to save for their retirement income needs and to provide additional attraction and retention of employees. Executive officers participate in the 401(k) plan on the same basis as other eligible employees.

Perquisites. Perquisites consist of the use of a company leased vehicle for the Chief Executive Officer and a car allowance for the Chief Financial Officer.

Exhibit 21

SUBSIDIARIES OF THE REGISTRANT

SUBSIDIARIES OF HURCO COMPANIES, INC.

		Jurisdiction
Name		of Incorporation
Hurco B.V.		the Netherlands
Hurco Canada		Canada
Hurco Europe Limited		United Kingdom
Hurco GmbH		Federal Republic of Germany
Hurco India Private, Ltd.		India
Hurco Manufacturing Ltd.		Taiwan R.O.C.
Hurco S.a.r.l.		France
Hurco S.r.l.		Italy
Hurco (S.E. Asia) Pte Ltd.		Singapore
Ningbo Hurco Machine Tool Company, Ltd.		China

Hurco Companies, Inc. is the Company’s headquarters in Indianapolis, Indiana, U.S.A. The foregoing list does not include other subsidiaries which, individually or in the aggregate, did not constitute a significant subsidiary as of October 31, 2011.

Exhibit 23

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

We consent to the incorporation by reference in the Registration Statements on Form S-8 (Nos. 333-48204 and 333-149809) of Hurco Companies, Inc. of our reports dated January 13, 2012, with respect to the consolidated financial statements and schedule of Hurco Companies, Inc. and the effectiveness of internal control over financial reporting of Hurco Companies, Inc. included in this Annual Report (Form 10-K) for the year ended October 31, 2011.

/s/ Ernst & Young LLP

Indianapolis, Indiana

January 13, 2012

Exhibit 31.1

CERTIFICATION PURSUANT TO RULE 13a-14(a) UNDER THE SECURITIES EXCHANGE

ACT OF 1934, AS AMENDED

I, Michael Doar, certify that:

I have reviewed this annual report on Form 10-K of Hurco Companies, Inc.;

Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures [as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)] and internal control over financial reporting [as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)] for the registrant and have:

(a)

Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)

Designed such internal control over financing reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. Generally Accepted Accounting Principles.

(c)

Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)

Disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of registrant's board of directors (or persons performing the equivalent functions):

(a)

All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

(b)

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

/s/ Michael Doar

Michael Doar,

Chairman of the Board, Chief Executive Officer and President

January 13, 2012

Exhibit 31.2

CERTIFICATION PURSUANT TO RULE 13a-14(a) UNDER THE SECURITIES

EXCHANGE ACT OF 1934, AS AMENDED

I, John G. Oblazney, certify that:

I have reviewed this annual report on Form 10-K of Hurco Companies, Inc.;

(a)

(b)

(c)

(d)

(a)

(b)

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

/s/ John G. Oblazney

John G. Oblazney

Vice President & Chief Financial Officer

January 13, 2012

Exhibit 32.1

CERTIFICATION PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the Annual Report of Hurco Companies, Inc. (the “Company”) on Form 10-K for the period ending October 31, 2011, as filed with the Securities and Exchange Commission on the date hereof (the “Report”), the undersigned hereby certifies, pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that:

(1)

The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2)

The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/ Michael Doar

Michael Doar

Chairman of the Board, Chief Executive Officer and President

January 13, 2012

Exhibit 32.2

CERTIFICATION PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

(1) The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2) The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/ John G. Oblazney

John G. Oblazney

Vice President & Chief Financial Officer

January 13, 2012